Surface characterization and mechanical properties of eggshell-derived calcium-deficient hydroxyapatite and graphene-nanoplatelet coatings on titanium alloys
Surface Engineering · 2026-11 · 42 (11) · 1176-1186
DOI: 10.1177/02670844261502279 ↗Kurz gefasst
Fachartikel in der Zeitschrift Surface Engineering, online erschienen am 26.10.2026. Verfasst von Chandra Shekar Beera und 1 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben.
Abstract (Originalsprache)
Titanium alloys are widely employed in orthopaedic and dental implant applications because of their favourable corrosion resistance, strength-to-weight ratio, and biocompatibility. However, inadequate surface hardness and wear resistance may limit long-term performance under repeated mechanical loading. Hydroxyapatite-based coatings have received considerable research attention for improving the biological response of titanium surfaces, although brittleness and limited mechanical stability remain important concerns. In the present study, sustainable eggshell-derived calcium-deficient hydroxyapatite (CDHA) and CDHA reinforced with graphene nanoplatelets (GNPs) were applied to Ti6Al4V and Ti6Al7Nb substrates using a low-temperature pack-based thermal treatment at 800 °C for 2 h under argon. Surface morphology, coating thickness, elemental composition, surface roughness, Raman characteristics, and microhardness were evaluated. The coatings exhibited heterogeneous particle-based morphologies with thicknesses of approximately 25–50 µm. Surface roughness increased after coating, whereas the incorporation of 0.5 wt.% GNPs produced a modest reduction in the mean Ra values. The highest measured microhardness values were 362 ± 11 HV for Ti6Al4V-CDHA-GNP and 354 ± 8 HV for Ti6Al7Nb-CDHA-GNP. Raman spectroscopy confirmed the retention of characteristic graphitic features in the GNP-containing systems. The results demonstrate that eggshell-derived CDHA-GNP coatings can modify the surface and mechanical response of titanium alloys; however, further optimization of coating uniformity, topography, and long-term biological and mechanical performance is required.
Zitieren
APA
Beera, C. S., & Nallu, R. (2026). Surface characterization and mechanical properties of eggshell-derived calcium-deficient hydroxyapatite and graphene-nanoplatelet coatings on titanium alloys. Surface Engineering, 42(11), 1176-1186. https://doi.org/10.1177/02670844261502279
Vancouver
Beera CS, Nallu R. Surface characterization and mechanical properties of eggshell-derived calcium-deficient hydroxyapatite and graphene-nanoplatelet coatings on titanium alloys. Surface Engineering. 2026;42(11):1176-1186. doi:10.1177/02670844261502279
BibTeX
@article{Beera2026,
author = {Beera, Chandra Shekar and Nallu, Ramanaiah},
title = {Surface characterization and mechanical properties of eggshell-derived calcium-deficient hydroxyapatite and graphene-nanoplatelet coatings on titanium alloys},
journal = {Surface Engineering},
year = {2026},
volume = {42},
number = {11},
pages = {1176--1186},
doi = {10.1177/02670844261502279}
}
EUVIMED