Evaluating the mechanical properties between printable resins of differing ceramic particle compositions
Innovation · 22.05.2026 · 1-5
DOI: 10.30771/2026.2 ↗Kurz gefasst
Fachartikel in der Zeitschrift Innovation, online erschienen am 22.05.2026. Verfasst von Vincent DeMaio und 4 weiteren Autor:innen.
Abstract (Originalsprache)
Background
Three-dimensional (3D) printing is a rapidly advancing technology in the biomedical field. In relation to orthodontics, one use example for 3D printing is the fabrication of in-office appliances. Fabrication of in-office appliances, such as fixed appliances, can be both cost-effective and potentially more efficient due to the customization capabilities. In this study, the load-bearing capacity of 3D-printed materials was examined with the aim of comparing varying ceramic particle compositions. Materials and Methods: In the first experiment, cylindrical rods with a diameter of 1.6mm were printed (n=15 per group) of 0% ceramic, 20% ceramic, and 50% ceramic. A three-point flexure test was conducted to measure the flexure modulus, mimicking the neck of a ceramic button. Utilizing the Instron Universal Testing Machine, a second test aimed to compare the shear bond strength at the bond interface of 3D-printed buttons bonded to resin maxillary premolars. Three resin compositions (n=15 per group) were examined: 0% ceramic, 20% ceramic, and 50% ceramic.
Results
When examining the results of the three-point flexure test, the mean maximum force withstood by the control, 20%, and 50% groups (in gF) were 1391 ± 9.03, 1428.50 ± 11.48, and 1934.29 ± 21.60, respectively. The results of the second experiment showed a statistically significant difference in the mean maximum force withstood by the three groups (ANOVA, p=3.92 E-6). There was a substantial increase in shear bond strength for the 20% ceramic group when compared to the control; however, shear bond strength decreased when ceramic composition increased to 50%.
Conclusion
Considering the results of the tests following the methodology employed, it can be stated that in-office printed ceramic appliances meet the mechanical requirements necessary for use in orthodontic clinics. Further research needs to be conducted to determine the saturation point at which ceramic concentration begins to negatively impact the shear bond strength of the printed appliance. Keywords: 3D printing, Intraoral appliances, Ceramic Buttons, 3D-printed appliances, Orthodontic Materials
Zitieren
APA
DeMaio, V., Alikhani, M., Sangsuwon, C., Abdullah, F., & Giovanetti, M. (2026). Evaluating the mechanical properties between printable resins of differing ceramic particle compositions. Innovation, 1-5. https://doi.org/10.30771/2026.2
Vancouver
DeMaio V, Alikhani M, Sangsuwon C, Abdullah F, Giovanetti M. Evaluating the mechanical properties between printable resins of differing ceramic particle compositions. Innovation. 2026:1-5. doi:10.30771/2026.2
BibTeX
@article{DeMaio2026,
author = {DeMaio, Vincent and Alikhani, Mani and Sangsuwon, Chinapa and Abdullah, Fanar and Giovanetti, Marcos},
title = {Evaluating the mechanical properties between printable resins of differing ceramic particle compositions},
journal = {Innovation},
year = {2026},
pages = {1--5},
doi = {10.30771/2026.2}
}
EUVIMED