Development of damage detection parameters over the lifetime of a rolling element bearing
Tribologia - Finnish Journal of Tribology · 2021
DOI: 10.30678/fjt.112092 ↗Kurz gefasst
Fachartikel in der Zeitschrift Tribologia - Finnish Journal of Tribology, 2021. Verfasst von Matti Savolainen und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper presents the trends of damage detection parameters over the lifetime of a rolling element bearing. In the experimental part, a series of bearing tests was performed using the twin-disc test device, until the monitored bearing was severely worn. This was followed by the analysis of measured acceleration and acoustic emission data in a constant-load condition, but also as loaded with impact-type loading. The results showed that traditionally used parameters, such as kurtosis and RMS, can indicate whether the bearing is damaged or not in a non-impact load condition. However, especially under impact-loading, the parameters based on acoustic emission data showed good performance and enabled monitoring of progress of the bearing damage.
Zitieren
APA
Savolainen, M., & Lehtovaara, A. (2021). Development of damage detection parameters over the lifetime of a rolling element bearing. Tribologia - Finnish Journal of Tribology. https://doi.org/10.30678/fjt.112092
Vancouver
Savolainen M, Lehtovaara A. Development of damage detection parameters over the lifetime of a rolling element bearing. Tribologia - Finnish Journal of Tribology. 2021. doi:10.30678/fjt.112092
BibTeX
@article{Savolainen2021,
author = {Savolainen, Matti and Lehtovaara, Arto},
title = {Development of damage detection parameters over the lifetime of a rolling element bearing},
journal = {Tribologia - Finnish Journal of Tribology},
year = {2021},
doi = {10.30678/fjt.112092}
}
EUVIMED