EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wear Development in Oscillating Rolling Element Bearings

Sebastian Wandel, Arne Bartschat, Jakob Glodowski, Norbert Bader, Gerhard Poll

Lubricants · 07.03.2023 · 11 (3) · 117

DOI: 10.3390/lubricants11030117 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Lubricants, online erschienen am 07.03.2023. Verfasst von Sebastian Wandel und 4 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry for Economic Affairs and Climate Action (Federal Republic of Germany) and of the project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rotor blade bearings enable rotor blades to pivot about their longitudinal axis and thus control the power output and reduce the loads acting on the wind turbine. Over a design period of 20 years, rolling bearings are exposed to frequent oscillation movements with amplitude ratios of x/2b > 1, especially due to new control concepts such as Individual Pitch Control, which can lead to wear and a reduction in service life. The objective of this paper was to identify the dominant wear mechanisms and their consequences for the operation of oscillating bearings. Oscillating experiments with an increasing number of cycles on the angular contact ball bearings of two different sizes (types 7208 and 7220) show that the damage initiation starts with adhesive and corrosive wear mechanisms, which result in a sharp increase in the torque as well as the wear volume on the bearing raceway. As the number of cycles increases, an abrasive mechanism occurs, resulting in a lower slope of the wear curve and a smoothing of the resulting wear depressions. The wear and torque curves were evaluated and classified using an energy-wear approach according to Fouvry.

Förderung

  • Federal Ministry for Economic Affairs and Climate Action (Federal Republic of Germany) and of the project

Zitieren

APA

Wandel, S., Bartschat, A., Glodowski, J., Bader, N., & Poll, G. (2023). Wear Development in Oscillating Rolling Element Bearings. Lubricants, 11(3), 117. https://doi.org/10.3390/lubricants11030117

Vancouver

Wandel S, Bartschat A, Glodowski J, Bader N, Poll G. Wear Development in Oscillating Rolling Element Bearings. Lubricants. 2023;11(3):117. doi:10.3390/lubricants11030117

BibTeX
@article{Wandel2023,
  author = {Wandel, Sebastian and Bartschat, Arne and Glodowski, Jakob and Bader, Norbert and Poll, Gerhard},
  title = {Wear Development in Oscillating Rolling Element Bearings},
  journal = {Lubricants},
  year = {2023},
  volume = {11},
  number = {3},
  pages = {117},
  doi = {10.3390/lubricants11030117}
}
Kostenlos starten →