EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 3.0

Influence of printing direction on 3D printed ABS specimens

Nassim Markiz, Eszter Horváth, Péter Ficzere

Production Engineering Archives · 01.09.2020 · 26 (3) · 127-130

DOI: 10.30657/pea.2020.26.24 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Production Engineering Archives, online erschienen am 29.09.2020. Verfasst von Nassim Markiz und 2 weiteren Autor:innen. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 3.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the recent years, additive manufacturing became an interesting topic in many fields due to the ease of manufacturing complex objects. However, it is impossible to determine the mechanical properties of any additive manufacturing parts without testing them. In this work, the mechanical properties with focus on ultimate tensile strength and modulus of elasticity of 3D printed acrylonitrile butadi-ene styrene (ABS) specimens were investigated. The tensile tests were carried using Zwick Z005 loading machine with a capacity of 5KN according to the American Society for Testing and Materials (ASTM) D638 standard test methods for tensile properties of plastics. The aim of this study is to investigate the influence of printing direction on the mechanical properties of the printed specimens. Thus, for each printing direction ( and ), five specimens were printed. Tensile testing of the 3D printed ABS specimens showed that the printing direction made the strongest specimen at an ultimate tensile strength of 22 MPa while at printing direction it showed 12 MPa. No influence on the modulus of elasticity was noticed. The experimental results are presented in the manuscript.

Zitieren

APA

Markiz, N., Horváth, E., & Ficzere, P. (2020). Influence of printing direction on 3D printed ABS specimens. Production Engineering Archives, 26(3), 127-130. https://doi.org/10.30657/pea.2020.26.24

Vancouver

Markiz N, Horváth E, Ficzere P. Influence of printing direction on 3D printed ABS specimens. Production Engineering Archives. 2020;26(3):127-130. doi:10.30657/pea.2020.26.24

BibTeX
@article{Markiz2020,
  author = {Markiz, Nassim and Horváth, Eszter and Ficzere, Péter},
  title = {Influence of printing direction on 3D printed ABS specimens},
  journal = {Production Engineering Archives},
  year = {2020},
  volume = {26},
  number = {3},
  pages = {127--130},
  doi = {10.30657/pea.2020.26.24}
}
Kostenlos starten →