EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Effect of copper-graphite composite electrode on material removal rate and surface roughness in MONEL 400 during electrical discharge machining

Mustafa Hadi, Abbas Ibrahim

Metallurgical and Materials Engineering · 2022

DOI: 10.30544/817 ↗

At a glance

Journal article in Metallurgical and Materials Engineering, 2022. Written by Mustafa Hadi and 1 co-authors. Cited 12 times so far (Crossref). The full text is freely available (open access, CC BY 4.0).

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

Electrical Discharge Machining (EDM) is one of the non-traditional machining processes commonly used for machining of hard to cut metals. Monel 400 is a nickel based superalloy used in various applications. The composite electrode is developed and applied to enhance the machining process by reducing the time of the process and the cost of the electrode manufacturing. The presented work is aimed to study the effect of copper, graphite, and copper-graphite composite electrodes with different parameters on the Material Removal Rate and Surface Roughness of Monel 400. Influences of discharge current (Ip), pulse on time (Ton), and pulse off time (Toff) have been investigated. Based on the Taguchi method, experiments were analyzed using ANOVA through Minitab 20. The results have manifested that compared to copper and graphite electrodes, the copper-graphite electrode achieved better values of material removal rate and surface roughness. The lowest value of surface roughness is 3.1413 μm as a result of the added graphite reinforcement particles.

Cite

APA

Hadi, M., & Ibrahim, A. (2022). Effect of copper-graphite composite electrode on material removal rate and surface roughness in MONEL 400 during electrical discharge machining. Metallurgical and Materials Engineering. https://doi.org/10.30544/817

Vancouver

Hadi M, Ibrahim A. Effect of copper-graphite composite electrode on material removal rate and surface roughness in MONEL 400 during electrical discharge machining. Metallurgical and Materials Engineering. 2022. doi:10.30544/817

BibTeX
@article{Hadi2022,
  author = {Hadi, Mustafa and Ibrahim, Abbas},
  title = {Effect of copper-graphite composite electrode on material removal rate and surface roughness in MONEL 400 during electrical discharge machining},
  journal = {Metallurgical and Materials Engineering},
  year = {2022},
  doi = {10.30544/817}
}
Start for free →