EUVIMEDObjevte EUVIMED
Open access · CC BY 4.0

Effect of the inclination angle of finned cylinder over a BFS on the MHD behavior in the presence of a nanofluid

Djamila Derbal, Mohamed Bouzit, Fayçal Bouzit

Metallurgical and Materials Engineering · 2022

DOI: 10.30544/760 ↗

At a glance

Journal article in Metallurgical and Materials Engineering, 2022. Written by Djamila Derbal and 2 co-authors. Cited 3 times so far (Crossref). The full text is freely available (open access, CC BY 4.0).

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

The present numerical study is based on the forced magnetohydrodynamic (MHD) convection of a ferrofluid through a backward facing step (BFS). A cylinder with two fixed fins and fixed dimensions is implanted inside fluid. The dimensionless governing equations have been solved using the multigrid finite element method. Several parameters were considered, such as the Hartmann number 0≤ Ha ≤100, the magnetic field inclination angle 0°≤ ɣ ≤90°, the Reynolds number 10≤ Re ≤200, the nanoparticle volume fraction 0%≤ φ ≤10%, and the fins inclination angle 0°≤ a ≤180°. The results have shown that the presence of the fins improves the heat transfer, especially at the position a = 90° where the Nuave number increases with a ratio of 113% for Re = 200.

Cite

APA

Derbal, D., Bouzit, M., & Bouzit, F. (2022). Effect of the inclination angle of finned cylinder over a BFS on the MHD behavior in the presence of a nanofluid. Metallurgical and Materials Engineering. https://doi.org/10.30544/760

Vancouver

Derbal D, Bouzit M, Bouzit F. Effect of the inclination angle of finned cylinder over a BFS on the MHD behavior in the presence of a nanofluid. Metallurgical and Materials Engineering. 2022. doi:10.30544/760

BibTeX
@article{Derbal2022,
  author = {Derbal, Djamila and Bouzit, Mohamed and Bouzit, Fayçal},
  title = {Effect of the inclination angle of finned cylinder over a BFS on the MHD behavior in the presence of a nanofluid},
  journal = {Metallurgical and Materials Engineering},
  year = {2022},
  doi = {10.30544/760}
}
Start for free →