EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of the inclination angle of finned cylinder over a BFS on the MHD behavior in the presence of a nanofluid

Djamila Derbal, Mohamed Bouzit, Fayçal Bouzit

Metallurgical and Materials Engineering · 2022

DOI: 10.30544/760 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical and Materials Engineering, 2022. Verfasst von Djamila Derbal und 2 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present numerical study is based on the forced magnetohydrodynamic (MHD) convection of a ferrofluid through a backward facing step (BFS). A cylinder with two fixed fins and fixed dimensions is implanted inside fluid. The dimensionless governing equations have been solved using the multigrid finite element method. Several parameters were considered, such as the Hartmann number 0≤ Ha ≤100, the magnetic field inclination angle 0°≤ ɣ ≤90°, the Reynolds number 10≤ Re ≤200, the nanoparticle volume fraction 0%≤ φ ≤10%, and the fins inclination angle 0°≤ a ≤180°. The results have shown that the presence of the fins improves the heat transfer, especially at the position a = 90° where the Nuave number increases with a ratio of 113% for Re = 200.

Zitieren

APA

Derbal, D., Bouzit, M., & Bouzit, F. (2022). Effect of the inclination angle of finned cylinder over a BFS on the MHD behavior in the presence of a nanofluid. Metallurgical and Materials Engineering. https://doi.org/10.30544/760

Vancouver

Derbal D, Bouzit M, Bouzit F. Effect of the inclination angle of finned cylinder over a BFS on the MHD behavior in the presence of a nanofluid. Metallurgical and Materials Engineering. 2022. doi:10.30544/760

BibTeX
@article{Derbal2022,
  author = {Derbal, Djamila and Bouzit, Mohamed and Bouzit, Fayçal},
  title = {Effect of the inclination angle of finned cylinder over a BFS on the MHD behavior in the presence of a nanofluid},
  journal = {Metallurgical and Materials Engineering},
  year = {2022},
  doi = {10.30544/760}
}
Kostenlos starten →