EUVIMEDEUVIMED entdecken
Crossref

Effect of Laser Surface Texturing Process on Dry Sliding Wear Behavior of NiTi Shape Memory Alloy Used in Airplane

Yılmaz Küçük, Emre Altaş, Hüseyin Bahar, Mustafa Gök

Journal of Aviation · 22.10.2024 · 8 (3) · 229-234

DOI: 10.30518/jav.1551063 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Aviation, online erschienen am 22.10.2024. Verfasst von Yılmaz Küçük und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: Lumos Laser.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the effect of laser surface texturing (LST) applied to NiTi Shape Memory Alloy (SMA) on the dry sliding wear behavior of the material was investigated. After polishing and cleaning the material surface, a pitted surface texturing process was performed using a femtosecond laser under atmospheric conditions. After the surface texturing process, dry sliding wear tests were performed at room temperature. When the wear behavior of the laser-applied and non-laser-applied test samples was evaluated comparatively, it was determined that the coefficient of friction (COF) of the laser-applied samples under 1N load was approximately 17% lower. It was determined that the decrease in the COF value decreased with increasing load. However, the wear amount of the LSD-applied NiTi SMA was higher than the untreated sample. It was evaluated that this situation was due to thermal softening that occurred depending on the ablation geometry and dimensions.

Förderung

  • Lumos Laser

Zitieren

APA

Küçük, Y., Altaş, E., Bahar, H., & Gök, M. (2024). Effect of Laser Surface Texturing Process on Dry Sliding Wear Behavior of NiTi Shape Memory Alloy Used in Airplane. Journal of Aviation, 8(3), 229-234. https://doi.org/10.30518/jav.1551063

Vancouver

Küçük Y, Altaş E, Bahar H, Gök M. Effect of Laser Surface Texturing Process on Dry Sliding Wear Behavior of NiTi Shape Memory Alloy Used in Airplane. Journal of Aviation. 2024;8(3):229-234. doi:10.30518/jav.1551063

BibTeX
@article{Kk2024,
  author = {Küçük, Yılmaz and Altaş, Emre and Bahar, Hüseyin and Gök, Mustafa},
  title = {Effect of Laser Surface Texturing Process on Dry Sliding Wear Behavior of NiTi Shape Memory Alloy Used in Airplane},
  journal = {Journal of Aviation},
  year = {2024},
  volume = {8},
  number = {3},
  pages = {229--234},
  doi = {10.30518/jav.1551063}
}
Kostenlos starten →