EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of the effect of titanium dioxide and gold nanoparticles surface treatment on the flexural strength of polymethyl methacrylate heat cure denture base resin

Rachel Rajan, Vidhya J, Azhagarasan NS, Jayakrishnakumar S, Hariharan Ramakrishnan

Journal of Clinical Advances in Dentistry · 2022

DOI: 10.29328/journal.jcad.1001025 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Clinical Advances in Dentistry, 2022. Verfasst von Rachel Rajan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aim

The purpose of this study was to evaluate the effect of Titanium dioxide and Gold nanoparticles surface treatment on the flexural strength of Polymethyl methacrylate (PMMA) Heat cure denture base resins. Materials and methods: A total of thirty PMMA Heat cure denture base resin test samples were fabricated of size 65 x 10 x 2.5 mm (rectangular shaped) according to ADA specification no.2. The samples were divided into three groups as Conventional PMMA heat cure denture base resin samples (GROUP I, n = 10 CONTROL), PMMA Heat cure denture base resin samples coated with Titanium dioxide nanoparticles (GROUP II, n = 10) and PMMA Heat cure denture base resin samples coated with Gold nanoparticles (GROUP III, n = 10). GROUP II and GROUP III PMMA Heat cure denture base resin test samples were coated by Magnetron sputtering. Flexural strength of GROUP I, GROUP II and Group III was evaluated by a three-point bend test using a Universal testing machine and the mean values were obtained.

Results

The Mean flexural strength of GROUP I, GROUP II and GROUP III samples were 114.79 MPa, 142.48 MPa and 154.70 MPa respectively. On comparative evaluation of the flexural strength among the three groups GROUP III PMMA Heat cure denture base resin samples exhibited the highest flexural strength followed by GROUP II and least by GROUP I. The statistical analysis by ANOVA had shown that there is significance in flexural strength among the groups tested (p - value = 0.000*).

Conclusion

Within the limitations of the study, PMMA heat cure denture base resin coated with Gold nanoparticles showed the highest flexural strength followed by PMMA Heat cure denture base resin coated with Titanium dioxide nanoparticles. Conventional PMMA Heat cure denture base resin without any surface treatment showed the least flexural strength.

Zitieren

APA

Rajan, R., J, V., NS, A., S, J., & Ramakrishnan, H. (2022). Evaluation of the effect of titanium dioxide and gold nanoparticles surface treatment on the flexural strength of polymethyl methacrylate heat cure denture base resin. Journal of Clinical Advances in Dentistry. https://doi.org/10.29328/journal.jcad.1001025

Vancouver

Rajan R, J V, NS A, S J, Ramakrishnan H. Evaluation of the effect of titanium dioxide and gold nanoparticles surface treatment on the flexural strength of polymethyl methacrylate heat cure denture base resin. Journal of Clinical Advances in Dentistry. 2022. doi:10.29328/journal.jcad.1001025

BibTeX
@article{Rajan2022,
  author = {Rajan, Rachel and J, Vidhya and NS, Azhagarasan and S, Jayakrishnakumar and Ramakrishnan, Hariharan},
  title = {Evaluation of the effect of titanium dioxide and gold nanoparticles surface treatment on the flexural strength of polymethyl methacrylate heat cure denture base resin},
  journal = {Journal of Clinical Advances in Dentistry},
  year = {2022},
  doi = {10.29328/journal.jcad.1001025}
}
Kostenlos starten →