EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Numerical Modeling of Stress Ratios in Single-Lap Adhesive Joints with Geometrical Modifications

Asep Kurnia, Ichsan Setya Putra, Hendri Syamsudin, Muhamad Giri Suada, Oktavianus Demas Priambudi

Advance Sustainable Science Engineering and Technology · 24.07.2026 · 8 (3) · 02603039

DOI: 10.26877/asset.v8i3.2516 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advance Sustainable Science Engineering and Technology, online erschienen am 24.07.2026. Verfasst von Asep Kurnia und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to analyze the effect of variations in aluminum strip geometry and Araldite adhesive on the mechanical strength of single lap joints. A two-dimensional numerical model was developed in Abaqus/Standard using cohesive zone elements, the Benzeggagh-Kenane (B-K) model, and a quadratic stress criterion to validate the experimental results. The results show that the developed model is capable of accurately describing the stress distribution and the effect of secondary bending moments through the ratio of normal stress to shear stress. The application of chamfer geometry to the adhesive area proved to be effective in reducing secondary bending moments and increasing joint resistance. A comparison between the experimental and numerical simulation results showed a deviation of less than 15.5%, confirming the validity of this model. This study highlights the importance of geometric optimization in improving the mechanical strength and reliability of adhesive joints.

Zitieren

APA

Kurnia, A., Putra, I. S., Syamsudin, H., Suada, M. G., & Priambudi, O. D. (2026). Numerical Modeling of Stress Ratios in Single-Lap Adhesive Joints with Geometrical Modifications. Advance Sustainable Science Engineering and Technology, 8(3), 02603039. https://doi.org/10.26877/asset.v8i3.2516

Vancouver

Kurnia A, Putra IS, Syamsudin H, Suada MG, Priambudi OD. Numerical Modeling of Stress Ratios in Single-Lap Adhesive Joints with Geometrical Modifications. Advance Sustainable Science Engineering and Technology. 2026;8(3):02603039. doi:10.26877/asset.v8i3.2516

BibTeX
@article{Kurnia2026,
  author = {Kurnia, Asep and Putra, Ichsan Setya and Syamsudin, Hendri and Suada, Muhamad Giri and Priambudi, Oktavianus Demas},
  title = {Numerical Modeling of Stress Ratios in Single-Lap Adhesive Joints with Geometrical Modifications},
  journal = {Advance Sustainable Science Engineering and Technology},
  year = {2026},
  volume = {8},
  number = {3},
  pages = {02603039},
  doi = {10.26877/asset.v8i3.2516}
}
Kostenlos starten →