Influence of adherend geometry modifications on the shear performance of single lap adhesive joints
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications · 06.05.2026
DOI: 10.1177/14644207261446867 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, online erschienen am 06.05.2026. Verfasst von Elanur Ozun und 6 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben.
Abstract (Originalsprache)
In this study, the effects of various pocket designs on single lap adhesive joints with PMMA adherends were systematically investigated. A finite element method (FEM) analysis of the unmodified joint was first performed to identify critical stress concentrations within the adhesive layer, and the pocket geometries were subsequently developed based on the resulting stress distributions. The pocket configurations were also designed to reduce adhesive consumption without compromising mechanical performance, while considering sustainability aspects. The geometric characteristics of the machined pockets were verified by optical microscopy. Single lap shear tests were carried out in accordance with ASTM D1002, and the experimental data were statistically analyzed using Analysis of Variance (ANOVA) to determine the parameters with the most significant influence on joint performance. A maximum shear load of 618.67 N was obtained for the joint incorporating six horizontally aligned blind pockets, corresponding to a 75% improvement compared to the unmodified joint. Furthermore, ANOVA results indicated that the number of blind pockets was a dominant factor affecting joint performance.
Zitieren
APA
Ozun, E., Ceylan, R., Bora, M. Ö., Ürgün, S., Fidan, S., Yarar, E., & Sinmazçelik, T. (2026). Influence of adherend geometry modifications on the shear performance of single lap adhesive joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. https://doi.org/10.1177/14644207261446867
Vancouver
Ozun E, Ceylan R, Bora MÖ, Ürgün S, Fidan S, Yarar E, et al. Influence of adherend geometry modifications on the shear performance of single lap adhesive joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2026. doi:10.1177/14644207261446867
BibTeX
@article{Ozun2026,
author = {Ozun, Elanur and Ceylan, Reyhan and Bora, M Özgür and Ürgün, Satılmış and Fidan, Sinan and Yarar, Eser and Sinmazçelik, Tamer},
title = {Influence of adherend geometry modifications on the shear performance of single lap adhesive joints},
journal = {Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications},
year = {2026},
doi = {10.1177/14644207261446867}
}
EUVIMED