EUVIMEDEUVIMED entdecken
Crossref

Effect of Build Orientation on Mechanical Behaviour and Build Time of FDM 3D-Printed PLA Parts: An Experimental Investigation

Meltem ERYILDIZ

European Mechanical Science · 20.09.2021 · 5 (3) · 116-120

DOI: 10.26701/ems.881254 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Mechanical Science, online erschienen am 20.09.2021. Verfasst von Meltem ERYILDIZ. Die Arbeit wurde bisher 87-mal zitiert (Crossref) und nennt 16 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

One of the important process parameters affecting the tensile strength and build time of the part is the build orientation. Therefore, in this study, FDM 3D-printed PLA parts were fabricated at different build orientations to examine the effects of build orientation on the tensile properties and build time of material. In this regard, three build orientations and three print angles were examined. According to results, tensile strength decreased when the build orientation of the parts was aligned from flat to upright direction and 0° to 90° printing angle. For upright build orientation, 36% less tensile strength obtained than the flat ones because of the fracture mode and the loading direction. In terms of build time, build time increased as the build orientation changed from flat to upright. Therefore, the build orientation had a big impact on the tensile properties and build time of the parts produced using FDM. The findings of this study will contribute to the literature on proper build orientations and print angles.

Zitieren

APA

ERYILDIZ, M. (2021). Effect of Build Orientation on Mechanical Behaviour and Build Time of FDM 3D-Printed PLA Parts: An Experimental Investigation. European Mechanical Science, 5(3), 116-120. https://doi.org/10.26701/ems.881254

Vancouver

ERYILDIZ M. Effect of Build Orientation on Mechanical Behaviour and Build Time of FDM 3D-Printed PLA Parts: An Experimental Investigation. European Mechanical Science. 2021;5(3):116-120. doi:10.26701/ems.881254

BibTeX
@article{ERYILDIZ2021,
  author = {ERYILDIZ, Meltem},
  title = {Effect of Build Orientation on Mechanical Behaviour and Build Time of FDM 3D-Printed PLA Parts: An Experimental Investigation},
  journal = {European Mechanical Science},
  year = {2021},
  volume = {5},
  number = {3},
  pages = {116--120},
  doi = {10.26701/ems.881254}
}
Kostenlos starten →