EUVIMEDEUVIMED entdecken
Crossref

A Closed Loop Transformer Monitoring Using Virtual Instrumentation

Saranya

i-manager's Journal on Instrumentation and Control Engineering · 2013

DOI: 10.26634/jic.1.4.2601 ↗

Kurz gefasst

Fachartikel in der Zeitschrift i-manager's Journal on Instrumentation and Control Engineering, 2013. Verfasst von Saranya. Die Arbeit nennt 11 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electricity is an extremely handy and useful form of energy. It plays an ever growing role in our modern industrialized society. The electrical power systems are highly non-linear, extremely huge and complex networks. Such electric power systems are unified for economical benefits, increased reliability and operational advantages. They are one of the most significant elements of both national and global infrastructure, and when these systems collapse it leads to major direct and indirect impacts on the economy and national security. A power system consists of components such as generators, lines, transformers, loads, switches and compensators. However, a widely dispersed power sources and loads are the general configuration of modern power systems [1] . Electric power systems can be divided into two sub-systems, namely, transmission systems and distribution systems. The main process of a transmission system is to transfer electric power from electric generators to customer area, whereas a distribution system provides an ultimate link between high voltage transmission systems and consumer services. In other words, the power is distributed to different customers from the distribution system through feeders, distributors and service mains. Supplying electricity to consumers necessitates power generation, transmission, and distribution. Initially electric power is generated by using electric generators such as: By nuclear power generators, thermal power generators and hydraulic power generators and then transmitted through transmission systems using high voltage. Power departs from the generator and enters into a transmission substation, where huge transformers convert the generator's voltage to extremely high voltages (155kV to 765 kV) for long-distance (up to about 300 miles) transmission. Then, the voltage level is reduced using transformers and power is transferred to customers through electric power distribution systems. Power starts from the transmission grid at distribution substations where the voltage is stepped-down (typically to less than 10kV) and carried by smaller distribution lines to supply commercial, residential, and industrial users. Novel electric power systems encompassing of power transmission and distribution grids consist of copious number of distributed, autonomously managed, capital-intensive assets. Such assets comprise: 1.) power plants, 2.) transmission lines, 3.) transformers, and 4.) protection equipment [2] . Electric utility substations are used in both the transmission and distribution system and operate independently to generate the electricity. A typical substation facility consists of a small building with a fenced-in yard that contains transformers, switches, voltage regulators, and metering equipment that are used to adjust voltages and monitor circuits. A reliable and efficient process of these networks alone is not very

Zitieren

APA

Saranya (2013). A Closed Loop Transformer Monitoring Using Virtual Instrumentation. i-manager's Journal on Instrumentation and Control Engineering. https://doi.org/10.26634/jic.1.4.2601

Vancouver

Saranya. A Closed Loop Transformer Monitoring Using Virtual Instrumentation. i-manager's Journal on Instrumentation and Control Engineering. 2013. doi:10.26634/jic.1.4.2601

BibTeX
@article{Saranya2013,
  author = {Saranya},
  title = {A Closed Loop Transformer Monitoring Using Virtual Instrumentation},
  journal = {i-manager's Journal on Instrumentation and Control Engineering},
  year = {2013},
  doi = {10.26634/jic.1.4.2601}
}
Kostenlos starten →