Implementation Of 3d Mapping Using A 2d Lidar Scanner
i-manager's Journal on Electronics Engineering · 2020
DOI: 10.26634/jele.10.3.17612 ↗Kurz gefasst
Fachartikel in der Zeitschrift i-manager's Journal on Electronics Engineering, 2020. Verfasst von Kok Leong Ng. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 12 Literaturangaben.
Abstract (Originalsprache)
LiDAR technology is a common technique used to perform remote mapping of an area. The LiDAR sensor uses a pulsed laser to measure the distance from it to an object. In this paper, the performance of a 3D scanning by using a 2D LiDAR sensor is implemented. A Scanse Sweep LiDAR sensor (2D) has been mounted on a frame and a servo motor has been used as the base of the device to perform scan on each plane of the environment, in order to achieve a 3D scanning/mapping purpose. The data collected from the 2D LiDAR and the angle of the motor are analyzed to produce the 3D point cloud data (PCD) and visualized using a commercial available 3D visualizer.
Zitieren
APA
Ng, K. L. (2020). Implementation Of 3d Mapping Using A 2d Lidar Scanner. i-manager's Journal on Electronics Engineering. https://doi.org/10.26634/jele.10.3.17612
Vancouver
Ng KL. Implementation Of 3d Mapping Using A 2d Lidar Scanner. i-manager's Journal on Electronics Engineering. 2020. doi:10.26634/jele.10.3.17612
BibTeX
@article{Ng2020,
author = {Ng, Kok Leong},
title = {Implementation Of 3d Mapping Using A 2d Lidar Scanner},
journal = {i-manager's Journal on Electronics Engineering},
year = {2020},
doi = {10.26634/jele.10.3.17612}
}
EUVIMED