RECONSTRUCTION OF 3D HUMAN BODY SURFACE USING SENSOR FUSION OF 2D LIDAR AND ENCODER
Jurnal Informatika dan Teknik Elektro Terapan · 13.04.2026 · 14 (2)
DOI: 10.23960/jitet.v14i2.9111 ↗Kurz gefasst
Fachartikel in der Zeitschrift Jurnal Informatika dan Teknik Elektro Terapan, online erschienen am 13.04.2026. Verfasst von Azzam Abidurrahman Mujahid. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Three-dimensional (3D) human body surface reconstruction is an essential component in geometric modeling and robotic perception systems. Conventional scanning approaches based on cameras or structured light often suffer from sensitivity to lighting conditions, occlusion, and limited measurement repeatability. This paper proposes a cost-effective 3D body surface reconstruction system based on sensor fusion between a 2D LiDAR and an incremental encoder mounted on a linear gantry mechanism. The 2D LiDAR performs horizontal distance scanning, while the encoder provides vertical position feedback to construct volumetric spatial data. Data acquisition and sensor synchronization are implemented using a ROS2-based modular architecture to ensure real-time data alignment. The acquired measurements are transformed from polar to Cartesian coordinates to generate a three-dimensional point cloud representation. Experimental validation was conducted on static human body objects, and the results show that the proposed system achieves average positional accuracy of 1.9 mm with Root Mean Square Error (RMSE) below 2% across different gantry speeds. These results demonstrate that the proposed LiDAR–encoder fusion approach provides a reliable and reproducible solution for 3D human body surface reconstruction in controlled environments.
Zitieren
APA
Mujahid, A. A. (2026). RECONSTRUCTION OF 3D HUMAN BODY SURFACE USING SENSOR FUSION OF 2D LIDAR AND ENCODER. Jurnal Informatika dan Teknik Elektro Terapan, 14(2). https://doi.org/10.23960/jitet.v14i2.9111
Vancouver
Mujahid AA. RECONSTRUCTION OF 3D HUMAN BODY SURFACE USING SENSOR FUSION OF 2D LIDAR AND ENCODER. Jurnal Informatika dan Teknik Elektro Terapan. 2026;14(2). doi:10.23960/jitet.v14i2.9111
BibTeX
@article{Mujahid2026,
author = {Mujahid, Azzam Abidurrahman},
title = {RECONSTRUCTION OF 3D HUMAN BODY SURFACE USING SENSOR FUSION OF 2D LIDAR AND ENCODER},
journal = {Jurnal Informatika dan Teknik Elektro Terapan},
year = {2026},
volume = {14},
number = {2},
doi = {10.23960/jitet.v14i2.9111}
}
EUVIMED