DESIGN AND TEACHING APPLICATION OF A 3D-PRINTED BENDING BEAM DEVICE FOR YOUNG’S MODULUS MEASUREMENT
Physics and Engineering · 2026-05 · 36 (3) · 216-222
DOI: 10.26599/phys.2026.9320328 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics and Engineering, 2026-05. Verfasst von Ying YUE und 4 weiteren Autor:innen.
Abstract (Originalsprache)
Young’s modulus is a fundamental physical quantity that characterizes the elastic properties of materials and is of great importance in physics teaching and engineering applications. In this study, an adjustable bending-beam device for measuring Young’s modulus was designed and fabricated based on 3D printing technology. The device has a modular structure, with adjustable support span, specimen interfaces, and loading configurations, allowing it to accommodate specimens with different cross-sectional shapes. To ensure measurement reliability, a complete measurement procedure and an uncertainty evaluation model were established. Measurements of an aluminum alloy beam yielded a Young’s modulus of 70.12(57)GPa, with a deviation of less than 1% from the reference value. Measurements of a non-standard material, spaghetti, gave a value of 4.540(50)GPa, further demonstrating the applicability of the device in open-ended experiments. In addition, students can use 3D printing to independently design beams with different cross-sectional shapes and investigate the influence of cross-sectional geometry on bending stiffness. In this way, the experiment can be extended from simple parameter measurement to an inquiry-based task involving design and analysis. This work provides a low-cost and flexible solution for university physics experiments and helps bridge physical principles with engineering practice.
Zitieren
APA
YUE, Y., WANG, Z., ZHU, W., ZHAO, X., & ZHANG, Z. (2026). DESIGN AND TEACHING APPLICATION OF A 3D-PRINTED BENDING BEAM DEVICE FOR YOUNG’S MODULUS MEASUREMENT. Physics and Engineering, 36(3), 216-222. https://doi.org/10.26599/phys.2026.9320328
Vancouver
YUE Y, WANG Z, ZHU W, ZHAO X, ZHANG Z. DESIGN AND TEACHING APPLICATION OF A 3D-PRINTED BENDING BEAM DEVICE FOR YOUNG’S MODULUS MEASUREMENT. Physics and Engineering. 2026;36(3):216-222. doi:10.26599/phys.2026.9320328
BibTeX
@article{YUE2026,
author = {YUE, Ying and WANG, Zhongping and ZHU, Wei and ZHAO, Xia and ZHANG, Zengming},
title = {DESIGN AND TEACHING APPLICATION OF A 3D-PRINTED BENDING BEAM DEVICE FOR YOUNG’S MODULUS MEASUREMENT},
journal = {Physics and Engineering},
year = {2026},
volume = {36},
number = {3},
pages = {216--222},
doi = {10.26599/phys.2026.9320328}
}
EUVIMED