EUVIMEDEUVIMED entdecken
Crossref

One-dimensional proton conductor catalyst layers for high-performance proton exchange membrane fuel cells

Xiaorui Qin, Caihan Zhu, Xinnan Chen, Xin Chen, Yuquan Shen, Mingkai Liu, Dewei Li, Yunan Wang

Nano Research · 30.10.2026

DOI: 10.26599/nr.2026.94909303 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nano Research, online erschienen am 30.10.2026. Verfasst von Xiaorui Qin und 7 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The practical performance of proton exchange membrane fuel cells (PEMFCs) is critically hampered by the disordered distribution of ionomers within the catalyst layer, which causes severe sulfonate‑induced poisoning of Pt active sites, discontinuous proton conduction, and restricted oxygen transport to catalytic centers. However, addressing these interrelated limitations simultaneously remains a formidable challenge, as most existing strategies tackle only one aspect at the expense of others. In this study, we report a catalyst layer architecture based on a one-dimensional proton conductor (1D Proton Conductor) that addresses the coupled limitations of random ionomer distribution, Pt site poisoning, and inefficient transport in PEMFCs. This design encapsulates ionomers uniformly on carbon nanotubes to create linear and continuous proton pathways, while spatially separating sulfonate groups from Pt surfaces and preserving open pore structures. The 1D Proton Conductor reduces sulfonate coverage on Pt from 31.7% to 14.9%, and decreases proton conduction and oxygen transport resistances by 34% and 40%, respectively. As a result, the mass activity of Pt doubles and the cell achieves a peak power density of 0.73 W cm-2 under 30% relative humidity, twice that of conventional electrodes. This work demonstrates that simultaneous regulation of ionomer distribution, surface chemistry, and transport properties offers a viable route to high-performance PEMFCs, particularly under low-humidity conditions. This study provides a feasible strategy for designing high-performance catalyst layer for PEMFCs.

Zitieren

APA

Qin, X., Zhu, C., Chen, X., Chen, X., Shen, Y., Liu, M., Li, D., & Wang, Y. (2026). One-dimensional proton conductor catalyst layers for high-performance proton exchange membrane fuel cells. Nano Research. https://doi.org/10.26599/nr.2026.94909303

Vancouver

Qin X, Zhu C, Chen X, Chen X, Shen Y, Liu M, et al. One-dimensional proton conductor catalyst layers for high-performance proton exchange membrane fuel cells. Nano Research. 2026. doi:10.26599/nr.2026.94909303

BibTeX
@article{Qin2026,
  author = {Qin, Xiaorui and Zhu, Caihan and Chen, Xinnan and Chen, Xin and Shen, Yuquan and Liu, Mingkai and Li, Dewei and Wang, Yunan},
  title = {One-dimensional proton conductor catalyst layers for high-performance proton exchange membrane fuel cells},
  journal = {Nano Research},
  year = {2026},
  doi = {10.26599/nr.2026.94909303}
}
Kostenlos starten →