Engineering Triple‐Phase Boundary in Pt Catalyst Layers for Proton Exchange Membrane Fuel Cells
Advanced Functional Materials · 2024-05 · 34 (19)
DOI: 10.1002/adfm.202310428 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 15.01.2024. Verfasst von Yi Li und 9 weiteren Autor:innen. Die Arbeit wurde bisher 48-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province, China Postdoctoral Science Foundation.
Abstract (Originalsprache)
Engineering triple‐phase boundaries in low Pt‐loaded catalyst layers is highly desired yet challenging due to the poor Pt utilization caused by inhomogeneous Nafion ionomer coverage over catalyst nanoparticles and high mass transport resistance near catalyst surface. Herein, an effective Pt catalyst/support design strategy by using urea to modify the carbon supports is reported, in which the balance between nitrogen doping and Pt nanoparticle deposition can be well achieved without sacrificing catalyst performance. The nitrogen‐modified carbon with the positively charged surface can electrostatically attract with ionomer with negative charges in a catalyst ink. Meanwhile, ionomer can be preserved into a solid catalyst layer, forming a desirable ionomer/catalyst interface with improved dry proton accessibility and lowered oxygen transport resistance. Consequently, this interface leads to striking performance improvement in the kinetic and mass transport regions in the membrane electrode assembly level, with the current density of 1.11 A cm −2 at 0.65 V under 50% RH and 85 °C operating conditions, reaching 2.8 times this value compared with the one without modification.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Jiangsu Province
- China Postdoctoral Science Foundation
Zitieren
APA
Li, Y., Wu, Z., Wang, C., Yu, X., Gao, W., Wang, B., Wu, C., Yao, Y., Yang, J., & Zou, Z. (2024). Engineering Triple‐Phase Boundary in Pt Catalyst Layers for Proton Exchange Membrane Fuel Cells. Advanced Functional Materials, 34(19). https://doi.org/10.1002/adfm.202310428
Vancouver
Li Y, Wu Z, Wang C, Yu X, Gao W, Wang B, et al. Engineering Triple‐Phase Boundary in Pt Catalyst Layers for Proton Exchange Membrane Fuel Cells. Advanced Functional Materials. 2024;34(19). doi:10.1002/adfm.202310428
BibTeX
@article{Li2024,
author = {Li, Yi and Wu, Zirui and Wang, Cheng and Yu, Xiwen and Gao, Wanguo and Wang, Bing and Wu, Congping and Yao, Yingfang and Yang, Juan and Zou, Zhigang},
title = {Engineering Triple‐Phase Boundary in Pt Catalyst Layers for Proton Exchange Membrane Fuel Cells},
journal = {Advanced Functional Materials},
year = {2024},
volume = {34},
number = {19},
doi = {10.1002/adfm.202310428}
}
EUVIMED