EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Investigation of Mechanical Properties of Various Substrate Materials using Polytetrafluoroethylene Coating Technique

S. Kulkarni, J. Tiwari, B. S. Varma

AFRICAN JOURNAL OF APPLIED RESEARCH · 07.07.2026 · 12 (5) · 341-362

DOI: 10.26437/berden23 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AFRICAN JOURNAL OF APPLIED RESEARCH, online erschienen am 07.07.2026. Verfasst von S. Kulkarni und 2 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

This study investigated the influence of Polytetrafluoroethylene (PTFE) coating on the mechanical and surface properties of different substrate materials, like Mild Steel (Cold Rolled and Hot Rolled), Aluminum Alloy, and Inconel 600 alloy. The objective is to evaluate coating thickness, microstructure, tensile strength, hardness, surface roughness, and corrosion resistance of PTFE-coated substrates. Design/Methodology/Approach: Prior to coating, substrates underwent surface preparation via solvent cleaning, sandblasting, grinding, and wire brushing. PTFE coatings were applied using a spray coating technique with single-coat and multi-coat deposition processes. The coated samples were cured at temperatures between 380–410 °C. Mechanical and surface characterisation tests, including coating thickness measurement, tensile testing, microhardness testing, surface roughness analysis, microstructural examination, and salt spray corrosion testing, were conducted in accordance with ASTM and IS standards. Research Limitation: The study was limited by variations in substrate thickness, short-duration salt spray testing, and absence of wear testing.

Findings

The results exhibit that multi-coat PTFE deposition produced a higher coating thickness than single-coat deposition. Inconel 600 alloy exhibited superior tensile strength, hardness, and surface finish compared with other substrates due to its nickel-chromium composition. Microstructural analysis confirmed uniform coating deposition without significant porosity or segregation defects. Surface roughness values improved after PTFE coating for all substrates. The findings revealed that PTFE-coated Inconel 600 alloy is suitable for high-temperature and corrosion-resistant industrial applications, while coated mild steel and aluminium alloys can be effectively used in cost-sensitive engineering applications requiring improved surface finish and protection. Practical Implication: Coating performance can enhance component durability, reduce maintenance frequency, and minimise material wastage in industrial applications. Social Implication: The use of PTFE-coated substrates can contribute to eco-friendly manufacturing practices by extending material life and reducing waste generation. Originality / Value: This study presents a correlational investigation of PTFE-coated Mild Steel, Aluminium Alloy, and Inconel 600 substrates under identical testing conditions, highlighting the influence of substrate material on coating performance and mechanical behaviour.

Zitieren

APA

Kulkarni, S., Tiwari, J., & Varma, B. S. (2026). Investigation of Mechanical Properties of Various Substrate Materials using Polytetrafluoroethylene Coating Technique. AFRICAN JOURNAL OF APPLIED RESEARCH, 12(5), 341-362. https://doi.org/10.26437/berden23

Vancouver

Kulkarni S, Tiwari J, Varma BS. Investigation of Mechanical Properties of Various Substrate Materials using Polytetrafluoroethylene Coating Technique. AFRICAN JOURNAL OF APPLIED RESEARCH. 2026;12(5):341-362. doi:10.26437/berden23

BibTeX
@article{Kulkarni2026,
  author = {Kulkarni, S. and Tiwari, J. and Varma, B. S.},
  title = {Investigation of Mechanical Properties of Various Substrate Materials using Polytetrafluoroethylene Coating Technique},
  journal = {AFRICAN JOURNAL OF APPLIED RESEARCH},
  year = {2026},
  volume = {12},
  number = {5},
  pages = {341--362},
  doi = {10.26437/berden23}
}
Kostenlos starten →