Effect of Slab System Type and Masonry Block Weight on the Seismic Performance of Reinforced Concrete Buildings: An ETABS-Based Comparative Study in Jeddah, Saudi Arabia
المجلة العربية للعلوم و نشر الأبحاث · 15.06.2026 · 12 (2) · 97-111
DOI: 10.26389/ajsrp.s040526 ↗Kurz gefasst
Fachartikel in der Zeitschrift المجلة العربية للعلوم و نشر الأبحاث, erschienen am 15.06.2026. Verfasst von Samer Salah Sewedan. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Objectives
This study evaluated the effect of slab system type and masonry block weight on the seismic performance of reinforced concrete buildings in Jeddah, Saudi Arabia. The study compared flat slab and hollow block slab systems under two masonry block-weight conditions and examined their influence on seismic weight, base shear, dynamic period, torsional irregularity, and story drift.
Methods
Four ETABS v22 structural models were developed: Flat Slab + 1700 block, Flat Slab + 400 block, Hollow Block Slab + 1700 block, and Hollow Block Slab + 400 block. To ensure a consistent comparison, the building geometry, material properties, seismic design parameters, load combinations, and lateral-load-resisting system were kept constant, while only the slab system type and masonry block weight were varied. The models were analyzed according to ACI 318-19, ASCE 7-16, and SBC 304-24.
Results
The results showed that increasing masonry block weight clearly increased the total dead load and seismic base shear. The Hollow Block Slab + 1700 block model recorded the highest total dead load of 74,295 kN and the highest base shear of 867.9 kN, whereas the Flat Slab + 400 block model recorded the lowest total dead load of 47,321 kN and the lowest base shear of 552.8 kN. Among the four analyzed models, the Flat Slab + 1700 block model recorded the longest dynamic period of 3.51 seconds, indicating the most flexible response, whereas the Hollow Block Slab + 400 block model recorded the shortest dynamic period of 2.07 seconds, indicating the stiffest response. The lowest drift values were generally obtained in the lighter block models, particularly the Hollow Block Slab + 400 block model.
Conclusions
The findings confirm that slab system type and masonry block weight are important variables in seismic performance assessment. Reducing masonry block weight decreases seismic force demand, while selecting a slab system with greater relative stiffness improves drift control. For the case-study building, the Hollow Block Slab + 400 block model provided the most favorable response in terms of dynamic period and story drift, whereas the Flat Slab + 400 block model produced the lowest base shear demand.
Zitieren
APA
Sewedan, S. S. (2026). Effect of Slab System Type and Masonry Block Weight on the Seismic Performance of Reinforced Concrete Buildings: An ETABS-Based Comparative Study in Jeddah, Saudi Arabia. المجلة العربية للعلوم و نشر الأبحاث, 12(2), 97-111. https://doi.org/10.26389/ajsrp.s040526
Vancouver
Sewedan SS. Effect of Slab System Type and Masonry Block Weight on the Seismic Performance of Reinforced Concrete Buildings: An ETABS-Based Comparative Study in Jeddah, Saudi Arabia. المجلة العربية للعلوم و نشر الأبحاث. 2026;12(2):97-111. doi:10.26389/ajsrp.s040526
BibTeX
@article{Sewedan2026,
author = {Sewedan, Samer Salah},
title = {Effect of Slab System Type and Masonry Block Weight on the Seismic Performance of Reinforced Concrete Buildings: An ETABS-Based Comparative Study in Jeddah, Saudi Arabia},
journal = {المجلة العربية للعلوم و نشر الأبحاث},
year = {2026},
volume = {12},
number = {2},
pages = {97--111},
doi = {10.26389/ajsrp.s040526}
}
EUVIMED