EUVIMEDEUVIMED entdecken
Crossref

Seismic Performance Assessment of G+12 Foam Concrete Reinforced Concrete Frames Using ETABS: A Comparative Study with Normal Weight Concrete

Aniket Sahu, Ankita Singhai, Dr. Rahul Kumar Satbhaiya

International Scientific Journal of Engineering and Management · 07.04.2026 · 05 (04) · 1-15

DOI: 10.55041/isjem06107 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Scientific Journal of Engineering and Management, online erschienen am 07.04.2026. Verfasst von Aniket Sahu und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The seismic vulnerability of reinforced concrete (RC) structures is closely tied to their self-weight, as inertial forces during ground shaking scale directly with structural mass. Structural Lightweight Concrete (SLWC), produced using foam concrete incorporating fly ash and quarry dust, presents a viable strategy to reduce dead loads and thereby attenuate earthquake-induced forces. This study presents a comprehensive comparative seismic performance assessment of a G+12 RC frame structure designed with foam concrete (LWC) against an equivalent normal weight concrete (NWC) bare frame. Structural modeling and analysis were carried out using ETABS software in accordance with Indian Standard IS 1893 (Part 1): 2002. The foam concrete mix comprised 65% fly ash, 35% cement, and 1.5% preformed protein-based foam by total weight, with quarry dust incrementally added up to 30% to enhance compressive strength. Seismic response parameters evaluated include maximum bending moment, shear force, storey displacement, storey drift, and axial force at each floor level under equivalent static and dynamic loading. Results reveal that the LWC frame exhibits a 22.81% reduction in maximum bending moment (from 734.17 kN-m to 566.81 kN-m) and a 10.77% reduction in shear force (from 941.85 kN to 840.43 kN) relative to the NWC bare frame. Maximum storey displacement also decreased from 88.84 mm to 66.16 mm, confirming markedly superior lateral stiffness. Additionally, the LWC alternative achieved a 18.78% reduction in concrete material costs and a 23.20% reduction in reinforcement requirements. These findings affirm that foam concrete is a structurally efficient and economically attractive material for earthquake-resistant high-rise construction in moderate-to-high seismic zones of India. Keywords: foam concrete; lightweight reinforced concrete; seismic analysis; ETABS; IS 1893; storey displacement; bending moment reduction

Zitieren

APA

Sahu, A., Singhai, A., & Satbhaiya, D. R. K. (2026). Seismic Performance Assessment of G+12 Foam Concrete Reinforced Concrete Frames Using ETABS: A Comparative Study with Normal Weight Concrete. International Scientific Journal of Engineering and Management, 05(04), 1-15. https://doi.org/10.55041/isjem06107

Vancouver

Sahu A, Singhai A, Satbhaiya DRK. Seismic Performance Assessment of G+12 Foam Concrete Reinforced Concrete Frames Using ETABS: A Comparative Study with Normal Weight Concrete. International Scientific Journal of Engineering and Management. 2026;05(04):1-15. doi:10.55041/isjem06107

BibTeX
@article{Sahu2026,
  author = {Sahu, Aniket and Singhai, Ankita and Satbhaiya, Dr. Rahul Kumar},
  title = {Seismic Performance Assessment of G+12 Foam Concrete Reinforced Concrete Frames Using ETABS: A Comparative Study with Normal Weight Concrete},
  journal = {International Scientific Journal of Engineering and Management},
  year = {2026},
  volume = {05},
  number = {04},
  pages = {1--15},
  doi = {10.55041/isjem06107}
}
Kostenlos starten →