Impact Strength Comparison of Heat-Polymerized PMMA and Graphene-Reinforced Pre-Polymerized PMMA (G-CAM) as Provisional Restorative Materials: An In Vitro Study
International Journal of Drug Delivery Technology · 16.11.2026 · 16 (80s)
DOI: 10.25258/ijddt.16.80s.46 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Drug Delivery Technology, online erschienen am 16.11.2026. Verfasst von Shreyasi Jogi und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Objective
To evaluate and compare the impact strength of heat-polymerized polymethyl methacrylate (PMMA) and graphene-reinforced pre-polymerized PMMA (G-CAM) used as provisional restorative materials. Materials and Methods: Twenty standardized specimens were fabricated and divided into two groups (n = 10 each): Group A, heat-polymerized PMMA (DPI Heat Cure); and Group B, graphene-reinforced pre-polymerized PMMA (G-CAM, Graphenano Dental). All specimens were tested using an Izod impact testing machine at 23 ± 2°C. Impact strength values were recorded in kJ/mm², and data were analyzed using descriptive statistics and unpaired t-tests.
Results
Group A (heat-polymerized PMMA) demonstrated a mean impact strength of 3.03 kJ/mm² (SD = 1.34), whereas Group B (graphene-reinforced G-CAM) showed a mean of 1.63 kJ/mm² (SD = 0.77). The intergroup difference was statistically significant (t = 2.841; p = 0.011).
Conclusions
Conventional heat-polymerized PMMA exhibited significantly superior impact strength compared with the graphene-reinforced pre-polymerized PMMA tested in this study. Although graphene-based materials remain promising for certain dental applications, the specific G-CAM formulation evaluated did not improve impact resistance and is therefore not recommended as a substitute for conventional PMMA when impact strength is a primary clinical consideration.
Zitieren
APA
Jogi, S., & Deshpande, S. (2026). Impact Strength Comparison of Heat-Polymerized PMMA and Graphene-Reinforced Pre-Polymerized PMMA (G-CAM) as Provisional Restorative Materials: An In Vitro Study. International Journal of Drug Delivery Technology, 16(80s). https://doi.org/10.25258/ijddt.16.80s.46
Vancouver
Jogi S, Deshpande S. Impact Strength Comparison of Heat-Polymerized PMMA and Graphene-Reinforced Pre-Polymerized PMMA (G-CAM) as Provisional Restorative Materials: An In Vitro Study. International Journal of Drug Delivery Technology. 2026;16(80s). doi:10.25258/ijddt.16.80s.46
BibTeX
@article{Jogi2026,
author = {Jogi, Shreyasi and Deshpande, Saee},
title = {Impact Strength Comparison of Heat-Polymerized PMMA and Graphene-Reinforced Pre-Polymerized PMMA (G-CAM) as Provisional Restorative Materials: An In Vitro Study},
journal = {International Journal of Drug Delivery Technology},
year = {2026},
volume = {16},
number = {80s},
doi = {10.25258/ijddt.16.80s.46}
}
EUVIMED