EUVIMEDEUVIMED entdecken
Crossref

Mechanical Properties of TiO2 Nanoparticles Incorporated PMMA Bone Cements

Neha R, Balaji Ganesh S, S. Jayalakshmi, Thebez Veda Jeyaraj Thooyamani, Konmireddy Vaishnavi

International Journal of Drug Delivery Technology · 25.04.2026 · 16 (20s)

DOI: 10.25258/ijddt.16.20s.46 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Drug Delivery Technology, online erschienen am 25.04.2026. Verfasst von Neha R und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

INTRODUCTION: Polymethylmethacrylate is considered the most prevalent bone cement base material. Most fractures that occur during function are due to its weakness and lack of mechanical strength. The apparent limitations of PMMA are insufficient ductility, strength, and viscoelastic behavior. The current study aims to strengthen and improve PMMA bone cement properties by adding TiO2 nanoparticles. Cold-cure Acrylic powder and Methyl Methacrylate were used to produce Polymethylmethacrylate (PMMA) as the polymeric base of composite. TiO2 nano powders were used as reinforcement phase. MATERIALS AND METHOD: PMMA bone cement samples were prepared by incorporating TiO₂ nanoparticles at varying weight percentages. Standardized specimens were fabricated and subjected to mechanical testing such as hardness and roughness. Hardness testing was carried out using a Vickers microhardness tester. The average Vickers hardness number (VHN) was calculated from multiple indentations on each sample. Surface roughness was evaluated using a surface profilometer. The average surface roughness (Ra) was measured by tracing the stylus across the sample surface over a defined length. RESULT: The results of this study demonstrated that the PMMA-TiO2 material has greater microhardness and lesser roughness than PMMA cement. According to the test performed the difference was statistically significant. CONCLUSION: The incorporation of TiO₂ nanoparticles into PMMA bone cement resulted in a notable improvement in surface and mechanical characteristics. The modified cement exhibited increased hardness compared to conventional PMMA, indicating enhanced resistance to deformation and wear. Additionally, a reduction in surface roughness was observed, suggesting a smoother surface profile that may minimize bacterial adhesion and improve overall material performance.

Zitieren

APA

R, N., S, B. G., Jayalakshmi, S., Thooyamani, T. V. J., & Vaishnavi, K. (2026). Mechanical Properties of TiO2 Nanoparticles Incorporated PMMA Bone Cements. International Journal of Drug Delivery Technology, 16(20s). https://doi.org/10.25258/ijddt.16.20s.46

Vancouver

R N, S BG, Jayalakshmi S, Thooyamani TVJ, Vaishnavi K. Mechanical Properties of TiO2 Nanoparticles Incorporated PMMA Bone Cements. International Journal of Drug Delivery Technology. 2026;16(20s). doi:10.25258/ijddt.16.20s.46

BibTeX
@article{R2026,
  author = {R, Neha and S, Balaji Ganesh and Jayalakshmi, S. and Thooyamani, Thebez Veda Jeyaraj and Vaishnavi, Konmireddy},
  title = {Mechanical Properties of TiO2 Nanoparticles Incorporated PMMA Bone Cements},
  journal = {International Journal of Drug Delivery Technology},
  year = {2026},
  volume = {16},
  number = {20s},
  doi = {10.25258/ijddt.16.20s.46}
}
Kostenlos starten →