Antibacterial, mechanical and curing properties of PMMA bone cement loaded with copper nanoparticles
Nanotechnology · 10.07.2026 · 37 (27) · 275701
DOI: 10.1088/1361-6528/ae83be ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanotechnology, online erschienen am 09.07.2026. Verfasst von Oscar Fernando Pacheco-Salazar und 7 weiteren Autor:innen. Beteiligte Einrichtung: Tecnológico Nacional de México (TecNM), campus Instituto Tecnológico Superior de Calkiní (ITESCAM), Avenida Ah Canul S/N por Carretera Federal, Calki…. Hauptthemen laut MEDLINE: Copper, Polymethyl Methacrylate, Anti-Bacterial Agents, Bone Cements. Die Arbeit nennt 33 Literaturangaben. Gefördert von: Tecnologico Nacional de México, CIQA, Secretaría de Ciencia, Humanidades, Tecnología e Innovación.
Abstract (Originalsprache)
Periprosthetic joint infection (PJI), a challenging complication of arthroplasty, is usually treated/managed using antibiotic-loaded PMMA bone cement. However, this cement has many shortcomings, such as a low cumulative amount of the antibiotic released by the time the release is exhausted and ineffectiveness against some bacteria that are present in many PJI cases, such as methicillin-resistant Staphylococcus aureus (S. aureus ). As such, there are many ongoing research programs focus on developing alternative cement formulations without compromising their mechanical and curing properties. The present study evaluates the antimicrobial, mechanical, and curing performance of PMMA bone cement loaded with 0.5, 1.0, or 1.5 wt.% Cu nanoparticles (Cu NPs) against Escherichia coli (E. coli) and S. aureus (concentration: 2.0 × 10 6 , 3.0 × 10 6 , and 7.1 × 10 6 CFU ml −1 ). Analysis of the nanoparticles using scanning electron microscopy, x-ray diffraction, and dynamic light scattering found they were nanocrystalline and had a mean hydrodynamic diameter of 114 nm. Evaluations of the antimicrobial performance of the cement, using the Kirby–Bauer disc diffusion method, showed that, for a given combination of bacterial species and concentration, the diameter of the inhibition zone on cement specimens increased with an increase in Cu NPs loading of the cement. The compressive testing revealed that the incorporation of Cu NPs did not significantly affect the compressive strength or elastic modulus of the cement. In addition, a decrease in the maximum curing temperature was observed with an increase in Cu NPs loading, while the setting time remained without significant differences. These findings suggest that a PMMA bone cement loaded with either 1.0 or 1.5 wt.% Cu NPs may be suitable for the treatment and management of PJI. Future studies of this cement are warranted.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Tecnológico Nacional de México (TecNM), campus Instituto Tecnológico Superior de Calkiní (ITESCAM), Avenida Ah Canul S/N por Carretera Federal, Calkiní, Campeche, C.P. 24900, México.
- Departamento de Química Macromolecular y Nanomateriales, SECIHTI-Centro de Investigación en Química Aplicada, Blvd. Enrique Reyna Hermosillo No. 140, Saltillo, Coahuila, C.P. 25294, México.
- Departamento de Materiales Avanzados, SECIHTI-Centro de Investigación en Química Aplicada, Blvd. Enrique Reyna Hermosillo No. 140, Saltillo, Coahuila, C.P. 25294, México.
ORCID-Profile: Oscar Fernando Pacheco-Salazar, Rosa Yazmín Us-Camas, José de Jesús Kú-Herrera, Celín Lozano-Pérez, Ena Deyla Bolaina-Lorenzo, Dafne Martínez-López, Nubia Noemi Cob-Calan, Luis Humberto May-Hernández
Förderung
- Tecnologico Nacional de México
- CIQA
- Secretaría de Ciencia, Humanidades, Tecnología e Innovación
Zitieren
APA
Pacheco-Salazar, O. F., Us-Camas, R. Y., Kú-Herrera, J. J., Lozano-Pérez, C., Bolaina-Lorenzo, E. D., Martínez-López, D., Cob-Calan, N. N., & May-Hernández, L. H. (2026). Antibacterial, mechanical and curing properties of PMMA bone cement loaded with copper nanoparticles. Nanotechnology, 37(27), 275701. https://doi.org/10.1088/1361-6528/ae83be
Vancouver
Pacheco-Salazar OF, Us-Camas RY, Kú-Herrera JJ, Lozano-Pérez C, Bolaina-Lorenzo ED, Martínez-López D, et al. Antibacterial, mechanical and curing properties of PMMA bone cement loaded with copper nanoparticles. Nanotechnology. 2026;37(27):275701. doi:10.1088/1361-6528/ae83be
BibTeX
@article{PachecoSalazar2026,
author = {Pacheco-Salazar, Oscar Fernando and Us-Camas, Rosa Yazmín and Kú-Herrera, José de Jesús and Lozano-Pérez, Celín and Bolaina-Lorenzo, Ena Deyla and Martínez-López, Dafne and Cob-Calan, Nubia Noemi and May-Hernández, Luis Humberto},
title = {Antibacterial, mechanical and curing properties of PMMA bone cement loaded with copper nanoparticles},
journal = {Nanotechnology},
year = {2026},
volume = {37},
number = {27},
pages = {275701},
doi = {10.1088/1361-6528/ae83be}
}
EUVIMED