EUVIMEDEUVIMED entdecken
Crossref

Advancing Thermoplastic Composite Heating Through Iterative Induction Coil Optimization

Harikrishnan Mohan, Andrew Cromer, Jaspreet Pandher, Darun Barazanchy

Journal of Aircraft · 2026-09 · 63 (5) · 2275-2293

DOI: 10.2514/1.c038563 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Aircraft, 2026-09. Verfasst von Harikrishnan Mohan und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 22 Literaturangaben. Gefördert von: Aeronautics Research Mission Directorate.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermoplastics provide several advantages over thermoset composites, including the potential for fastener-free assembly via induction welding. Key parameters in modeling this process include coil frequency, excitation current, and coil offset distance. However, optimizing heat generation through coil geometry remains underexplored. This study aims to derive relationships between coil geometry, heating rate, and frequency through an iterative coil design approach. Two coil design groups are developed to target heat generation in specific regions. Each design undergoes a numerical analysis loop to assess heating performance. Designs showing high heating rates and appropriate temperature profiles are fabricated and experimentally tested. The thermocouple temperature data from these tests are compared to numerical predictions to validate model accuracy. Results show strong agreement between simulations and experiments. The best-performing coils are then used in the induction welding of a stiffened fuselage demonstrator. Welding parameters are determined for each component in the stiffened fuselage demonstrator, and joint performance is evaluated by prying open the welded joints for inspection.

Förderung

  • Aeronautics Research Mission Directorate

Zitieren

APA

Mohan, H., Cromer, A., Pandher, J., & Barazanchy, D. (2026). Advancing Thermoplastic Composite Heating Through Iterative Induction Coil Optimization. Journal of Aircraft, 63(5), 2275-2293. https://doi.org/10.2514/1.c038563

Vancouver

Mohan H, Cromer A, Pandher J, Barazanchy D. Advancing Thermoplastic Composite Heating Through Iterative Induction Coil Optimization. Journal of Aircraft. 2026;63(5):2275-2293. doi:10.2514/1.c038563

BibTeX
@article{Mohan2026,
  author = {Mohan, Harikrishnan and Cromer, Andrew and Pandher, Jaspreet and Barazanchy, Darun},
  title = {Advancing Thermoplastic Composite Heating Through Iterative Induction Coil Optimization},
  journal = {Journal of Aircraft},
  year = {2026},
  volume = {63},
  number = {5},
  pages = {2275--2293},
  doi = {10.2514/1.c038563}
}
Kostenlos starten →