EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Repair of Impacted Thermoplastic Composite Laminates Using Induction Welding

Vedant Modi, Aswani Kumar Bandaru, Karthik Ramaswamy iD, Conor Kelly, Conor McCarthy, Tomas Flanagan iD, Ronan O'Higgins

Polymers · 29.07.2023 · 15 (15) · 3238

DOI: 10.3390/polym15153238 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.07.2023. Verfasst von Vedant Modi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Bernal Institute, School of Engineering, University of Limerick, V94 T9PX Limerick, Ireland. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Foundation Ireland, Irish Research Council Enterprise Partner Scheme.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The lack of well-developed repair techniques limits the use of thermoplastic composites in commercial aircraft, although trends show increased adoption of composite materials. In this study, high-performance thermoplastic composites, viz., carbon fibre (CF) reinforced Polyetherketoneketone (PEKK) and Polyether ether ketone (PEEK), were subjected to low-velocity impact tests at 20 J. Post-impact, the damaged panels were repaired using an induction welder by applying two different methods: induction welding of a circular patch to the impacted area of the laminate (RT-1); and induction welding of the impacted laminates under the application of heat and pressure (RT-2). The panels were subjected to compression-after-impact and repair (CAI-R), and the results are compared with those from the compression-after-impact (CAI) tests. For CF/PEKK, the RT-1 and RT-2 resulted in a 13% and 7% higher strength, respectively, than the value for CAI. For CF/PEEK, the corresponding values for RT-1 and RT-2 were higher by 13% and 17%, respectively. Further analysis of the damage and repair techniques using ultrasonic C-scans and CAI-R tests indicated that induction welding can be used as a repair technique for industrial applications. The findings of this study are promising for use in aerospace and automotive applications.

Schlagwörter

Stichwörter der Autor:innen

CF/PEEKCF/PEKKcarbon fibre reinforced thermoplasticscompression after impactfusion bondinginduction weldingrepair

Autor:innen und Institutionen

  • Bernal Institute, School of Engineering, University of Limerick, V94 T9PX Limerick, Ireland.
  • ÉireComposites, H91 Y923 Galway, Ireland.
  • Confirm Research Centre, University of Limerick, V94 T9PX Limerick, Ireland.

ORCID-Profile: Karthik Ramaswamy, Tomas Flanagan

Förderung

  • Science Foundation Ireland
  • Irish Research Council Enterprise Partner Scheme

Zitieren

APA

Modi, V., Bandaru, A. K., Ramaswamy, K., Kelly, C., McCarthy, C., Flanagan, T., & O'Higgins, R. (2023). Repair of Impacted Thermoplastic Composite Laminates Using Induction Welding. Polymers, 15(15), 3238. https://doi.org/10.3390/polym15153238

Vancouver

Modi V, Bandaru AK, Ramaswamy K, Kelly C, McCarthy C, Flanagan T, et al. Repair of Impacted Thermoplastic Composite Laminates Using Induction Welding. Polymers. 2023;15(15):3238. doi:10.3390/polym15153238

BibTeX
@article{Modi2023,
  author = {Modi, Vedant and Bandaru, Aswani Kumar and Ramaswamy, Karthik and Kelly, Conor and McCarthy, Conor and Flanagan, Tomas and O'Higgins, Ronan},
  title = {Repair of Impacted Thermoplastic Composite Laminates Using Induction Welding},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {15},
  pages = {3238},
  doi = {10.3390/polym15153238}
}
Kostenlos starten →