EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Rice Husk Ash–Magnesium Oxide Addition on Wear Behavior of Aluminum Alloy Matrix Hybrid Composites

Abbas Y. Awad, Mohammed N. Ibrahim, Mohamed K. Hussein

Tikrit Journal of Engineering Sciences · 01.12.2018 · 25 (4) · 16-23

DOI: 10.25130/tjes.25.4.04 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tikrit Journal of Engineering Sciences, online erschienen am 01.12.2018. Verfasst von Abbas Y. Awad und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A336.0 aluminum alloy used to fabricate hybrid composites using rice husk ash (RHA) and MgO particles as reinforcement. The influence of the particles on the wear behavior of A336.0 aluminum alloy as a matrix that reinforced with MgO and RHA was investigated. Firstly, the rice husk burned at 700°C and then heat treated at 1100°C for 2 hrs. The ash characterized by X-ray florescence and X-ray diffraction. Less than 53 and 125 micron are the particle sizes of MgO and RHA respectively. The hybrid composites manufactured using stir casting method in two steps. A336.0 aluminum alloy reinforced with 4:0, 3:1, 2:2, 1:3 and 0:4 of RHA: MgO with 10 wt% total reinforcement phase. Optical microscope and X-ray diffraction were used to characterize the prepared hybrid composites. Dry sliding wear, hardness, apparent density, percentage of porosity and coefficient of friction were examined. Results indicated that porosity, apparent density and hardness enhanced with increasing MgO, while increasing wt% of RHA decreased the apparent density. Results indicated that with inceasing the applied load the wear rate of the composites was enhanced. Coefficient of friction varies inversely with applied load and wt% of RHA. Hardness increased with increasing RHA while the friction coefficient and the wear rate decreased. The minimum wear rates were at 10% RHA and Al-alloy-(RHA-MgO) [3:1] composites, while the minimum friction coefficients were at 10% RHA composites.

Zitieren

APA

Awad, A. Y., Ibrahim, M. N., & Hussein, M. K. (2018). Effects of Rice Husk Ash–Magnesium Oxide Addition on Wear Behavior of Aluminum Alloy Matrix Hybrid Composites. Tikrit Journal of Engineering Sciences, 25(4), 16-23. https://doi.org/10.25130/tjes.25.4.04

Vancouver

Awad AY, Ibrahim MN, Hussein MK. Effects of Rice Husk Ash–Magnesium Oxide Addition on Wear Behavior of Aluminum Alloy Matrix Hybrid Composites. Tikrit Journal of Engineering Sciences. 2018;25(4):16-23. doi:10.25130/tjes.25.4.04

BibTeX
@article{Awad2018,
  author = {Awad, Abbas Y. and Ibrahim, Mohammed N. and Hussein, Mohamed K.},
  title = {Effects of Rice Husk Ash–Magnesium Oxide Addition on Wear Behavior of Aluminum Alloy Matrix Hybrid Composites},
  journal = {Tikrit Journal of Engineering Sciences},
  year = {2018},
  volume = {25},
  number = {4},
  pages = {16--23},
  doi = {10.25130/tjes.25.4.04}
}
Kostenlos starten →