EUVIMEDEUVIMED entdecken
Crossref

Analyzing empirically and optimizing surface roughness and tool wear during turning aluminum matrix/rice husk ash (RHA) composite

Nnamdi Chukwunenye Igwe, Chigbogu G. Ozoegwu

The International Journal of Advanced Manufacturing Technology · 2024-09 · 134 (3-4) · 1563-1580

DOI: 10.1007/s00170-024-14163-w ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 06.08.2024. Verfasst von Nnamdi Chukwunenye Igwe und 1 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 46 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research studied the effect of rice husk ash (RHA) during the turning of AlSi10Mg aluminum alloy. Stir casting was the chosen fabrication technique for this investigation. The combined effects of the following turning process parameters including cutting speed (s), feed (f), depth of cut (d), and weight fraction of reinforcement (wt\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${w}_{t}$$\end{document}) on the responses; that is the tool wear and surface roughness were studied. Taguchi L16\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\text{L}}_{16}$$\end{document} orthogonal array was adopted to determine the experimental runs. The analysis of variance (ANOVA) for the tool wear and the surface roughness showed that the feed and the cutting speed were the most significant factors influencing the tool wear and surface roughness, respectively. Using single objective optimization also affirmed the feed and cutting speed as the most influencing parameters for the tool wear and surface roughness, respectively. The predicted model for tool wear and surface roughness obtained from the regression equation shows a good correlation with the experimental results. A correlation of 95% and 94% of tool wear and surface roughness was determined between the predicted and corresponding experimental results.

Zitieren

APA

Igwe, N. C., & Ozoegwu, C. G. (2024). Analyzing empirically and optimizing surface roughness and tool wear during turning aluminum matrix/rice husk ash (RHA) composite. The International Journal of Advanced Manufacturing Technology, 134(3-4), 1563-1580. https://doi.org/10.1007/s00170-024-14163-w

Vancouver

Igwe NC, Ozoegwu CG. Analyzing empirically and optimizing surface roughness and tool wear during turning aluminum matrix/rice husk ash (RHA) composite. The International Journal of Advanced Manufacturing Technology. 2024;134(3-4):1563-1580. doi:10.1007/s00170-024-14163-w

BibTeX
@article{Igwe2024,
  author = {Igwe, Nnamdi Chukwunenye and Ozoegwu, Chigbogu G.},
  title = {Analyzing empirically and optimizing surface roughness and tool wear during turning aluminum matrix/rice husk ash (RHA) composite},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2024},
  volume = {134},
  number = {3-4},
  pages = {1563--1580},
  doi = {10.1007/s00170-024-14163-w}
}
Kostenlos starten →