EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Design and Development of a Motorcycle Brake Fluid Temperature Monitoring System to Prevent The Vapor Lock Conditions

Alex Taufiqurrohman Zain, Dwi Djoko Suranto, Cahyaning Nur Karimah, Ahmad Fahriannur, Ahmad Yusuf Adi Chandra

International Journal of Technology, Food and Agriculture · 10.01.2026 · 3 (1) · 7-15

DOI: 10.25047/tefa.v3i1.6799 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Technology, Food and Agriculture, online erschienen am 10.01.2026. Verfasst von Alex Taufiqurrohman Zain und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

One of the braking system problems in a motorcycle is a vapor lock. Vapor lock can occur when brake fluid, the fluid that helps the brake piston movement, experiences increased heat until it evaporates. Vapor lock can occur when the vehicle has been used due to the high-performance load of the braking system. This research aims to create a brake fluid temperature measuring and monitoring tool. By monitoring the brake fluid temperature, vapor lock conditions can be anticipated. To conduct this research, several materials are required, including K-type thermocouple sensor, Arduino Mega module, RGB bright LED, buzzer, and LCD. The accuracy value of the sensor will be calculated. The results showed that under all conditions, the sensor accuracy had a good value, above 98%. When implemented on a motorcycle, brake fluid temperature conditions are divided into four ranges: 29 °C to 124 °C; 125 °C to 134 °C; 135 °C to 145 °C; and above 145 °C. The results of the implementation on the motorcycle were successful overall, where the condition of each actuator changed when the temperature range of the motorcycle's brake fluid also changed. For example, at the highest temperature, the RGB bright LED lights up Red, the buzzer sounds continuously, and the status message on the LCD is “Bahaya!”.

Zitieren

APA

Zain, A. T., Suranto, D. D., Karimah, C. N., Fahriannur, A., & Chandra, A. Y. A. (2026). Design and Development of a Motorcycle Brake Fluid Temperature Monitoring System to Prevent The Vapor Lock Conditions. International Journal of Technology, Food and Agriculture, 3(1), 7-15. https://doi.org/10.25047/tefa.v3i1.6799

Vancouver

Zain AT, Suranto DD, Karimah CN, Fahriannur A, Chandra AYA. Design and Development of a Motorcycle Brake Fluid Temperature Monitoring System to Prevent The Vapor Lock Conditions. International Journal of Technology, Food and Agriculture. 2026;3(1):7-15. doi:10.25047/tefa.v3i1.6799

BibTeX
@article{Zain2026,
  author = {Zain, Alex Taufiqurrohman and Suranto, Dwi Djoko and Karimah, Cahyaning Nur and Fahriannur, Ahmad and Chandra, Ahmad Yusuf Adi},
  title = {Design and Development of a Motorcycle Brake Fluid Temperature Monitoring System to Prevent The Vapor Lock Conditions},
  journal = {International Journal of Technology, Food and Agriculture},
  year = {2026},
  volume = {3},
  number = {1},
  pages = {7--15},
  doi = {10.25047/tefa.v3i1.6799}
}
Kostenlos starten →