EUVIMEDEUVIMED entdecken
Crossref

Design optimization for material reduction in motorcycle brake discs

Vũ Duy Đức, Vũ Duy Đức, Vu Ngo Anh, Duc Vu Duy, Quan Tran Manh, Huy Vu Quoc, Hung Bui Van

Transport and Communications Science Journal · 16.07.2025 · 76 (7) · 951-964

DOI: 10.47869/tcsj.76.7.3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Transport and Communications Science Journal, online erschienen am 16.07.2025. Verfasst von Vũ Duy Đức und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Brake discs are essential components in motorcycle braking systems, where structural strength and thermal stability significantly affect vehicle safety and performance. However, conventional brake disc designs often encounter trade-offs between weight reduction and mechanical durability. This study aims to analyze and optimize the design of a motorcycle brake disc to reduce weight and stress while maintaining structural integrity and performance. A standard disc model from the HONDA LEAD (SCR) was reconstructed and analyzed using Altair HyperMesh, integrating both static structural and modal analysis methods. Topology optimization via the OptiStruct module was applied to minimize material in low-stress regions. Following structural optimization, modal analysis was conducted to determine the natural frequencies and evaluate dynamic behavior under real-world conditions. The optimized design achieved a 9.4% reduction in mass and an 11.5% decrease in peak stress while maintaining the displacement and resonance frequencies within acceptable limits. These results confirm that the proposed approach significantly enhances brake disc performance and durability. This study demonstrates the effectiveness of combining finite element analysis and topology optimization in enhancing both static and dynamic characteristics of motorcycle brake components

Zitieren

APA

Đức, V. D., Đức, V. D., Anh, V. N., Duy, D. V., Manh, Q. T., Quoc, H. V., & Van, H. B. (2025). Design optimization for material reduction in motorcycle brake discs. Transport and Communications Science Journal, 76(7), 951-964. https://doi.org/10.47869/tcsj.76.7.3

Vancouver

Đức VD, Đức VD, Anh VN, Duy DV, Manh QT, Quoc HV, et al. Design optimization for material reduction in motorcycle brake discs. Transport and Communications Science Journal. 2025;76(7):951-964. doi:10.47869/tcsj.76.7.3

BibTeX
@article{c2025,
  author = {Đức, Vũ Duy and Đức, Vũ Duy and Anh, Vu Ngo and Duy, Duc Vu and Manh, Quan Tran and Quoc, Huy Vu and Van, Hung Bui},
  title = {Design optimization for material reduction in motorcycle brake discs},
  journal = {Transport and Communications Science Journal},
  year = {2025},
  volume = {76},
  number = {7},
  pages = {951--964},
  doi = {10.47869/tcsj.76.7.3}
}
Kostenlos starten →