Additive Manufacturing and Advanced Technology with Materials of Polymer, Concrete and Clay in Construction Industry and Architecture
Civil and Environmental Engineering · 21.05.2026
DOI: 10.2478/cee-2026-0104 ↗Kurz gefasst
Fachartikel in der Zeitschrift Civil and Environmental Engineering, online erschienen am 21.05.2026. Verfasst von Oldrich Sucharda und 6 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Additive manufacturing is increasingly being used in areas not traditionally associated with this type of technology, such as 3D printing of concrete or clay. This study focuses on the experiences with the 3D printing process for these materials. The goal was not to create final construction or artistic works, but rather to verify the capabilities of the equipment and solutions, prepare basic material recipes, and explore the practical challenges of working with printing mixtures and materials. As part of the experiments, architectural test samples were printed from both clay and geopolymer composites, which were used to verify the behaviour of the material during printing and after curing.
Zitieren
APA
Sucharda, O., Marcalikova, Z., Gandel, R., Kralovanec, J., Cmiel, P., Topolář, L., & Dlabikova, I. (2026). Additive Manufacturing and Advanced Technology with Materials of Polymer, Concrete and Clay in Construction Industry and Architecture. Civil and Environmental Engineering. https://doi.org/10.2478/cee-2026-0104
Vancouver
Sucharda O, Marcalikova Z, Gandel R, Kralovanec J, Cmiel P, Topolář L, et al. Additive Manufacturing and Advanced Technology with Materials of Polymer, Concrete and Clay in Construction Industry and Architecture. Civil and Environmental Engineering. 2026. doi:10.2478/cee-2026-0104
BibTeX
@article{Sucharda2026,
author = {Sucharda, Oldrich and Marcalikova, Zuzana and Gandel, Radoslav and Kralovanec, Jakub and Cmiel, Petr and Topolář, Libor and Dlabikova, Ivona},
title = {Additive Manufacturing and Advanced Technology with Materials of Polymer, Concrete and Clay in Construction Industry and Architecture},
journal = {Civil and Environmental Engineering},
year = {2026},
doi = {10.2478/cee-2026-0104}
}
EUVIMED