Additive Manufacturing with Clay and Ceramics: Materials, Modeling, and Applications
Ceramics · 04.12.2025 · 8 (4) · 148
DOI: 10.3390/ceramics8040148 ↗Kurz gefasst
Fachartikel in der Zeitschrift Ceramics, online erschienen am 04.12.2025. Verfasst von Rafael G. Duque-Castro und 6 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 216 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Secretaría Nacional de Ciencia, Tecnología e Innovación.
Abstract (Originalsprache)
Additive manufacturing (AM) with clay and ceramic-based materials is gaining momentum as a sustainable alternative in construction, yet its advancement depends on bridging experimental practice with predictive modeling. This review synthesizes advances in mathematical formulations and numerical tools applied to clay, geopolymers, alumina, and related extrusion-based pastes. Classical rheological models, including the Bingham and Herschel–Bulkley formulations, remain central for characterizing yield stress, structuration, and flow stability. Meanwhile, finite element (FEM) and computational fluid dynamics (CFD) approaches are increasingly supporting predictions of deformation, shrinkage, drying, and sintering. Despite these advances, their application to natural clay systems remains limited due to heterogeneity, moisture sensitivity, and the lack of standardized constitutive parameters. Recent studies emphasize that validation is essential: rheometry, layer stability tests, in situ monitoring, and prototyping provide necessary calibration for reliable simulation. In parallel, parametric and generative design workflows, particularly through Rhino and Grasshopper ecosystems, illustrate how digital methods can link geometric logic, fabrication constraints, and performance criteria. Overall, the literature demonstrates a transition from isolated modeling efforts toward integrated, iterative frameworks where rheology, numerical simulation, and experimental validation converge to improve predictability, reduce trial-and-error, and advance scalable and sustainable clay- and ceramic-based AM.
Förderung
- Secretaría Nacional de Ciencia, Tecnología e Innovación
Zitieren
APA
Duque-Castro, R. G., Berrocal, D. I., Pérez, M. N. M., Castillero-Ortega, L. E., Jaén-Ortega, A. A., Rodríguez, J. B., & Ortega-Del-Rosario, M. D. L. A. (2025). Additive Manufacturing with Clay and Ceramics: Materials, Modeling, and Applications. Ceramics, 8(4), 148. https://doi.org/10.3390/ceramics8040148
Vancouver
Duque-Castro RG, Berrocal DI, Pérez MNM, Castillero-Ortega LE, Jaén-Ortega AA, Rodríguez JB, et al. Additive Manufacturing with Clay and Ceramics: Materials, Modeling, and Applications. Ceramics. 2025;8(4):148. doi:10.3390/ceramics8040148
BibTeX
@article{DuqueCastro2025,
author = {Duque-Castro, Rafael G. and Berrocal, Diana Isabel and Pérez, Melany Nicole Medina and Castillero-Ortega, Luis Ernesto and Jaén-Ortega, Antonio Alberto and Rodríguez, Juan Blandón and Ortega-Del-Rosario, Maria De Los Angeles},
title = {Additive Manufacturing with Clay and Ceramics: Materials, Modeling, and Applications},
journal = {Ceramics},
year = {2025},
volume = {8},
number = {4},
pages = {148},
doi = {10.3390/ceramics8040148}
}
EUVIMED