Study on Designing the Extruder for 3D Printers with Pellets
Acta Marisiensis. Seria Technologica · 2019
DOI: 10.2478/amset-2019-0004 ↗Kurz gefasst
Fachartikel in der Zeitschrift Acta Marisiensis. Seria Technologica, 2019. Verfasst von Sorin Cristian Albu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 3.0).
Abstract (Originalsprache)
The purpose of the paper is to design an extruder to ensure continuous flow of material and retraction of the melted material into the extruder of the printers operating with pellets ABS, PLA or other materials used. The way in which 3D printers work differs from that of plastic injection machines by the fact that for the execution of a piece it is necessary for the extruder to position itself at different points of the surface without depositing the material. If it does not stop the flow of material during the repositioning move, then the executed piece will be compromised. Designed pieces were designed with the help of the Inventor Software and it was determined experimentally whether the extruder is working. It was found that the original design did not fully meet the requirements of the coat-coat process, which is why rethinking of the extruder’s operation and modifications to ensure retraction of the material is necessary.
Zitieren
APA
Albu, S. C., & NuȚiu, E. (2019). Study on Designing the Extruder for 3D Printers with Pellets. Acta Marisiensis. Seria Technologica. https://doi.org/10.2478/amset-2019-0004
Vancouver
Albu SC, NuȚiu E. Study on Designing the Extruder for 3D Printers with Pellets. Acta Marisiensis. Seria Technologica. 2019. doi:10.2478/amset-2019-0004
BibTeX
@article{Albu2019,
author = {Albu, Sorin Cristian and NuȚiu, Emil},
title = {Study on Designing the Extruder for 3D Printers with Pellets},
journal = {Acta Marisiensis. Seria Technologica},
year = {2019},
doi = {10.2478/amset-2019-0004}
}
EUVIMED