Optimization of Printing Parameters for Direct and Indirect Extrusion on Hydrogel 3D Printers
Management and Production Engineering Review · 27.03.2026 · 17 (1) · 1-11
DOI: 10.24425/mper.2026.158638 ↗Kurz gefasst
Fachartikel in der Zeitschrift Management and Production Engineering Review, online erschienen am 27.03.2026. Verfasst von Thanh Tan Nguyen und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Three-dimensional (3D) printing is an attractive method for creating gel geometries for specific applications. In this research, the 3D printing parameters for direct and indirect extrusion of alginate-based hydrogels are optimized using the Taguchi and Analysis of Variance methods for output responses, including printed shape retention and the height of the 3-printed layers. The results show that for an indirect extrusion, the optimal values of extrusion speed, printingspeed, and nozzle distance for the shape retention ability are 13 steps/mm, 50 mm/s, and 0.5 mm, respectively, while those values for the printed height are 13 steps/mm, 60 mm/s, and 0.5 mm, respectively. For direct extrusion, the optimal parameter set for former response is 35 steps/mm, 60 mm/s, and 0.6 mm, respectively, while the set for the latter is 35 steps/mm, 40 mm/s, and 0.6 mm, respectively. The findings in this report can be used as data for related research.
Zitieren
APA
Nguyen, T. T., Pham, N. H., Nguyen, H. N., Phan, Q. B., & Tran, V. T. (2026). Optimization of Printing Parameters for Direct and Indirect Extrusion on Hydrogel 3D Printers. Management and Production Engineering Review, 17(1), 1-11. https://doi.org/10.24425/mper.2026.158638
Vancouver
Nguyen TT, Pham NH, Nguyen HN, Phan QB, Tran VT. Optimization of Printing Parameters for Direct and Indirect Extrusion on Hydrogel 3D Printers. Management and Production Engineering Review. 2026;17(1):1-11. doi:10.24425/mper.2026.158638
BibTeX
@article{Nguyen2026,
author = {Nguyen, Thanh Tan and Pham, Ngoc Hieu and Nguyen, Hoai Nam and Phan, Quoc Bao and Tran, Van Tron},
title = {Optimization of Printing Parameters for Direct and Indirect Extrusion on Hydrogel 3D Printers},
journal = {Management and Production Engineering Review},
year = {2026},
volume = {17},
number = {1},
pages = {1--11},
doi = {10.24425/mper.2026.158638}
}
EUVIMED