Fixation of proximal humeral Salter-Harris type 1 fractures in a 3-dimensionally printed skeletally immature canine bone model: a biomechanical assessment of fully threaded headless cannulated screws
American Journal of Veterinary Research · 01.11.2026 · 87 (11)
DOI: 10.2460/ajvr.26.05.0221 ↗Kurz gefasst
Fachartikel in der Zeitschrift American Journal of Veterinary Research, erschienen am 01.11.2026. Verfasst von Tae-Woong Hwang und 3 weiteren Autor:innen. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Bone Screws, Fracture Fixation, Internal, Shoulder Fractures. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Objective
To compare the biomechanical stability of 4 fixation techniques for proximal humeral physeal fractures in skeletally immature canines using 3-D–printed models.
Methods
This experimental in vitro study was conducted from September 25, 2025, through April 22, 2026. To strictly control biological variability, identical 3-D–printed models of juvenile canine proximal humeral Salter-Harris type 1 fractures (CT-derived from a 6-month-old 26-kg Labrador Retriever) were evaluated across 4 groups: pin and tension band wire (group A), partially threaded cannulated screw (group B), fully threaded headless cannulated screw (FTHCS) alone (group C), and FTHCS with a 1.6-mm Kirschner (K)-wire (group D). Tensile loading was applied at 10 mm/min at 105° to simulate supraspinatus traction. Outcomes included loads at 1- and 2-mm displacements, maximum failure load, and failure modes.
Results
Twenty-four models were tested (n = 6/group). Group D exhibited significantly higher resistance at 1-mm (663.95 N) and 2-mm (1,080.33 N) displacements than other groups. At 1-mm displacement, group D outperformed groups C, A, and B (mean differences [MD]: 206.2 N, 380.6 N, and 405.7 N, respectively; P < .0083). Maximum failure load did not differ significantly. Group B failed via localized proximal crushing and subsidence, whereas FTHCS groups (C, D) preserved proximal integrity, failing distally.
Conclusions
In this 3-D–printed model, FTHCS combined with a K-wire provided superior resistance to tensile displacement compared with other tested constructs. Clinical Relevance FTHCS augmented with a K-wire may offer a biomechanically robust alternative mitigating subhead bone collapse, providing sufficient standalone stability for early rehabilitation in immature canines.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
ORCID-Profile: Tae-Woong Hwang, Eunseo Kang, Jung-Moon Kim, Hwi-Yool Kim
Zitieren
APA
Hwang, T. W., Kang, E., Kim, J. M., & Kim, H. Y. (2026). Fixation of proximal humeral Salter-Harris type 1 fractures in a 3-dimensionally printed skeletally immature canine bone model: a biomechanical assessment of fully threaded headless cannulated screws. American Journal of Veterinary Research, 87(11). https://doi.org/10.2460/ajvr.26.05.0221
Vancouver
Hwang TW, Kang E, Kim JM, Kim HY. Fixation of proximal humeral Salter-Harris type 1 fractures in a 3-dimensionally printed skeletally immature canine bone model: a biomechanical assessment of fully threaded headless cannulated screws. American Journal of Veterinary Research. 2026;87(11). doi:10.2460/ajvr.26.05.0221
BibTeX
@article{Hwang2026,
author = {Hwang, Tae-Woong and Kang, Eunseo and Kim, Jung-Moon and Kim, Hwi-Yool},
title = {Fixation of proximal humeral Salter-Harris type 1 fractures in a 3-dimensionally printed skeletally immature canine bone model: a biomechanical assessment of fully threaded headless cannulated screws},
journal = {American Journal of Veterinary Research},
year = {2026},
volume = {87},
number = {11},
doi = {10.2460/ajvr.26.05.0221}
}
EUVIMED