EUVIMEDEUVIMED entdecken
Crossref

Biomechanical design of a new proximal humerus fracture plate using alternative materials

Sabrina Islam iD, Mitchell Dembowski iD, Emil H Schemitsch iD, Habiba Bougherara iD, Z Shaghayegh Bagheri iD, Radovan Zdero iD

International Journal for Numerical Methods in Biomedical Engineering · 2024

DOI: 10.1002/cnm.3868 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal for Numerical Methods in Biomedical Engineering, 2024. Verfasst von Sabrina Islam und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, George Mason University, Fairfax, Virginia, USA. Hauptthemen laut MEDLINE: Bone Plates, Finite Element Analysis. Die Arbeit nennt 78 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Comminuted proximal humerus fractures are often repaired by metal plates, but potentially still experience bone refracture, bone “stress shielding,” screw perforation, delayed healing, and so forth. This “proof of principle” investigation is the initial step towards the design of a new plate using alternative materials to address some of these problems. Finite element modeling was used to create design graphs for bone stress, plate stress, screw stress, and interfragmentary motion via three different fixations (no, 1, or 2 “kickstand” [KS] screws across the fracture) using a wide range of plate elastic moduli ( E P = 5–200 GPa). Well‐known design optimization criteria were used that could minimize bone, plate, and screw failure (i.e., peak stress < ultimate tensile strength), reduce bone “stress shielding” (i.e., bone stress under the new plate ≥ bone stress for an intact humerus, titanium plate, and/or steel plate “control”), and encourage callus growth leading to early healing (i.e., 0.2 mm ≤ axial interfragmentary motion ≤ 1 mm; shear/axial interfragmentary motion ratio

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Bone PlatesFinite Element AnalysisHumansBiomechanical PhenomenaShoulder FracturesStress, MechanicalBone ScrewsHumerusProsthesis DesignFracture Fixation, InternalTitanium

Stichwörter der Autor:innen

biomechanicsdesignmaterialplateproximal humerus fracture

Substanzen

Titanium

Autor:innen und Institutionen

  • Department of Mechanical Engineering, George Mason University, Fairfax, Virginia, USA.
  • Department of Mechanical Engineering, Toronto Metropolitan University, Toronto, Ontario, Canada.
  • Orthopaedic Biomechanics Lab, Victoria Hospital, London, Ontario, Canada.
  • Division of Orthopaedic Surgery, Western University, London, Ontario, Canada.
  • Kite Research Institute, Toronto Rehabilitation Institute, University Health Network, Toronto, Ontario, Canada.

ORCID-Profile: Sabrina Islam, Mitchell Dembowski, Emil H Schemitsch, Habiba Bougherara, Z Shaghayegh Bagheri, Radovan Zdero

Zitieren

APA

Islam, S., Dembowski, M., Schemitsch, E. H., Bougherara, H., Bagheri, Z. S., & Zdero, R. (2024). Biomechanical design of a new proximal humerus fracture plate using alternative materials. International Journal for Numerical Methods in Biomedical Engineering. https://doi.org/10.1002/cnm.3868

Vancouver

Islam S, Dembowski M, Schemitsch EH, Bougherara H, Bagheri ZS, Zdero R. Biomechanical design of a new proximal humerus fracture plate using alternative materials. International Journal for Numerical Methods in Biomedical Engineering. 2024. doi:10.1002/cnm.3868

BibTeX
@article{Islam2024,
  author = {Islam, Sabrina and Dembowski, Mitchell and Schemitsch, Emil H and Bougherara, Habiba and Bagheri, Z Shaghayegh and Zdero, Radovan},
  title = {Biomechanical design of a new proximal humerus fracture plate using alternative materials},
  journal = {International Journal for Numerical Methods in Biomedical Engineering},
  year = {2024},
  doi = {10.1002/cnm.3868}
}
Kostenlos starten →