EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Analysis of deviation shapes on noise-causing gears

Hao Lyu, Zhaoyao Shi, Shitao Wang

Metrology and Measurement Systems · 02.06.2026 · 33 (1)

DOI: 10.24425/mms.2026.158368 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metrology and Measurement Systems, online erschienen am 02.06.2026. Verfasst von Hao Lyu und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In modern industrial applications, gears serve as pivotal transmission components, whose transmission performance is critical to operational stability of mechanical systems. For electric vehicles subject to stringent noise control specifications, the suppression and control of gear transmission noise carry heightened importance. To tackle gear noise at its root cause, this paper regards gear deviations as the primary excitation source of vibration and noise and systematically analyses six typical gear deviation shapes as well as the corresponding tooth-pair change-over characteristics in meshing. In addition, the mechanism of formation of the corner contact phenomenon and its influential effect on gear transmission errors are being investigated in depth. On this basis, in this paper a novel least-squares sine wave fitting method is proposed. The results demonstrate that the proposed method can effectively achieve the separation and quantitative characterisation of diverse gear deviations. Meanwhile, this paper conducts an in-depth analysis of transmission errors in noise-causing gears, verifying that eccentricity error, pitch deviation and tooth surface texture of gears are the key influencing factors dominating transmission errors and subsequent noise excitation. This research provides a refined analytical paradigm and reliable technical support for the precision quality evaluation and noise fault diagnosis of gears.

Zitieren

APA

Lyu, H., Shi, Z., & Wang, S. (2026). Analysis of deviation shapes on noise-causing gears. Metrology and Measurement Systems, 33(1). https://doi.org/10.24425/mms.2026.158368

Vancouver

Lyu H, Shi Z, Wang S. Analysis of deviation shapes on noise-causing gears. Metrology and Measurement Systems. 2026;33(1). doi:10.24425/mms.2026.158368

BibTeX
@article{Lyu2026,
  author = {Lyu, Hao and Shi, Zhaoyao and Wang, Shitao},
  title = {Analysis of deviation shapes on noise-causing gears},
  journal = {Metrology and Measurement Systems},
  year = {2026},
  volume = {33},
  number = {1},
  doi = {10.24425/mms.2026.158368}
}
Kostenlos starten →