EUVIMEDEUVIMED entdecken
Open Access · CC BY-ND 4.0

Photocurable resins for 3D printing: chemical and materials engineering aspects

Jakub Pietraszewski, Monika Topa-Skwarczyńska, Małgorzata Noworyta, Joanna Ortyl

Chemical and Process Engineering: New Frontiers · 21.07.2026 · 47 (2) · e133

DOI: 10.24425/cpe.2026.158131 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chemical and Process Engineering: New Frontiers, online erschienen am 21.07.2026. Verfasst von Jakub Pietraszewski und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of functional photopolymer resins for additive manufacturing requires a combined materials and chemical engineering approach that addresses both resin formulation and the interactions between photocurable systems and 3D printing technologies. Herein, a series of investigations was conducted to rigorously delineate the influence of titanium dioxide (TiO2) as an additive on the kinetics of the photopolymerization process and on the resulting quality parameters of photocurable resin prints. TiO2 was incorporated at concentrations of 0.1–30 wt.%, and the resins were studied using Real-Time FT-IR, photo-DSC, photo-rheology and Jacobs curves. Low-to-medium additive concentrations accelerated early polymerization due to enhanced light scattering, whereas higher concentrations reduced light penetration and delayed curing. In addition to material performance, the chemical engineering aspects of additive manufacturing were examined by fabricating printouts on two 3D printers employing different technologies. Printouts from two 3D printers with different technologies, LCD and DLP, revealed a strong dependence on printer technology: the LCD system successfully printed only the base and 0.1 wt.% TiO2 formulations, but with higher quality, while the higher-intensity DLP system processed all formulations. These results demonstrate that both titanium dioxide content and printing technology influence curing efficiency and final print quality, which are critical for the development of photopolymer resins.

Zitieren

APA

Pietraszewski, J., Topa-Skwarczyńska, M., Noworyta, M., & Ortyl, J. (2026). Photocurable resins for 3D printing: chemical and materials engineering aspects. Chemical and Process Engineering: New Frontiers, 47(2), e133. https://doi.org/10.24425/cpe.2026.158131

Vancouver

Pietraszewski J, Topa-Skwarczyńska M, Noworyta M, Ortyl J. Photocurable resins for 3D printing: chemical and materials engineering aspects. Chemical and Process Engineering: New Frontiers. 2026;47(2):e133. doi:10.24425/cpe.2026.158131

BibTeX
@article{Pietraszewski2026,
  author = {Pietraszewski, Jakub and Topa-Skwarczyńska, Monika and Noworyta, Małgorzata and Ortyl, Joanna},
  title = {Photocurable resins for 3D printing: chemical and materials engineering aspects},
  journal = {Chemical and Process Engineering: New Frontiers},
  year = {2026},
  volume = {47},
  number = {2},
  pages = {e133},
  doi = {10.24425/cpe.2026.158131}
}
Kostenlos starten →