EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Integration of Hybrid Machine Learning and Multi-Objective Optimization for Enhanced Turning Parameters of EN-GJL-250 Cast Iron

Yacine Karmi, Haithem Boumediri, Omar Reffas, Yazid Chetbani, Sabbah Ataya, Rashid Khan, Mohamed Athmane Yallese, Aissa Laouissi

Crystals · 12.03.2025 · 15 (3) · 264

DOI: 10.3390/cryst15030264 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 12.03.2025. Verfasst von Yacine Karmi und 7 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University (IMSIU).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to optimize the turning parameters for EN-GJL-250 grey cast iron using hybrid machine learning techniques integrated with multi-objective optimization algorithms. The experimental design focused on evaluating the impact of cutting tool type, testing three tools: uncoated and coated silicon nitride (Si3N4) ceramic inserts and coated cubic boron nitride (CBN). Key cutting parameters such as depth of cut (ap), feed rate (f), and cutting speed (Vc) were varied to examine their effects on surface roughness (Ra), cutting force (Fr), and power consumption (Pc). The results showed that the coated Si3N4 tool achieved the best surface finish, with minimal cutting force and power consumption, while the uncoated Si3N4 and CBN tools performed slightly worse. Advanced optimization models including improved grey wolf optimizer–deep neural networks (DNN-IGWOs), genetic algorithm–deep neural networks (DNN-GAs), and deep neural network–extended Kalman filters (DNN-EKF) were compared with traditional methods like Support Vector Machines (SVMs), Decision Trees (DTs), and Levenberg–Marquardt (LM). The DNN-EKF model demonstrated exceptional predictive accuracy with an R2 value of 0.99. The desirability function (DF) method identified the optimal machining parameters for the coated Si3N4 tool: ap = 0.25 mm, f = 0.08 mm/rev, and Vc = 437.76 m/min. At these settings, Fr ranged between 46.424 and 47.405 N, Ra remained around 0.520 µm, and Pc varied between 386.518 W and 392.412 W. The multi-objective grey wolf optimization (MOGWO) further refined these parameters to minimize Fr, Ra, and Pc. This study demonstrates the potential of integrating machine learning and optimization techniques to significantly enhance manufacturing efficiency.

Förderung

  • Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University (IMSIU)

Zitieren

APA

Karmi, Y., Boumediri, H., Reffas, O., Chetbani, Y., Ataya, S., Khan, R., Yallese, M. A., & Laouissi, A. (2025). Integration of Hybrid Machine Learning and Multi-Objective Optimization for Enhanced Turning Parameters of EN-GJL-250 Cast Iron. Crystals, 15(3), 264. https://doi.org/10.3390/cryst15030264

Vancouver

Karmi Y, Boumediri H, Reffas O, Chetbani Y, Ataya S, Khan R, et al. Integration of Hybrid Machine Learning and Multi-Objective Optimization for Enhanced Turning Parameters of EN-GJL-250 Cast Iron. Crystals. 2025;15(3):264. doi:10.3390/cryst15030264

BibTeX
@article{Karmi2025,
  author = {Karmi, Yacine and Boumediri, Haithem and Reffas, Omar and Chetbani, Yazid and Ataya, Sabbah and Khan, Rashid and Yallese, Mohamed Athmane and Laouissi, Aissa},
  title = {Integration of Hybrid Machine Learning and Multi-Objective Optimization for Enhanced Turning Parameters of EN-GJL-250 Cast Iron},
  journal = {Crystals},
  year = {2025},
  volume = {15},
  number = {3},
  pages = {264},
  doi = {10.3390/cryst15030264}
}
Kostenlos starten →