Determination of Heat Treatment Parameters of Gypsum Molds in the Al/CF Composite Manufacturing Process
Archives of Foundry Engineering · 30.03.2026 · 139-146
DOI: 10.24425/afe.2026.157980 ↗Kurz gefasst
Fachartikel in der Zeitschrift Archives of Foundry Engineering, online erschienen am 30.03.2026. Verfasst von P. Szymańska und 2 weiteren Autor:innen. Die Arbeit nennt 1 Literaturangaben.
Abstract (Originalsprache)
This paper presents a novel method for producing aluminium matrix composites reinforced with short carbon fibers. The composite casting process was preceded by studies on the determination of heat treatment parameters of gypsum molds. Taking into account the decomposition temperature of carbon fibers of 396˚C in an oxygen atmosphere, tests were carried out to verify the possibility of casting in a mold annealed at 380˚C. For this purpose, the moisture content of the gypsum mass was annealed at 730˚C and 380˚C was compared. The effect of a lower annealing temperature on the roughness of the aluminium matrix was also investigated, and a composite casting was made by saturating the CF preform with an aluminium alloy. The obtained castings were subjected to metallographic analysis. As a result of the conducted research, it was found that it is possible to obtain an Al/CF composite without the use of additional protective coatings and high saturation pressures, which increase production costs.
Zitieren
APA
Szymańska, P., Szymański, P., & Szymański, M. (2026). Determination of Heat Treatment Parameters of Gypsum Molds in the Al/CF Composite Manufacturing Process. Archives of Foundry Engineering, 139-146. https://doi.org/10.24425/afe.2026.157980
Vancouver
Szymańska P, Szymański P, Szymański M. Determination of Heat Treatment Parameters of Gypsum Molds in the Al/CF Composite Manufacturing Process. Archives of Foundry Engineering. 2026:139-146. doi:10.24425/afe.2026.157980
BibTeX
@article{Szymaska2026,
author = {Szymańska, P. and Szymański, P. and Szymański, M.},
title = {Determination of Heat Treatment Parameters of Gypsum Molds in the Al/CF Composite Manufacturing Process},
journal = {Archives of Foundry Engineering},
year = {2026},
pages = {139--146},
doi = {10.24425/afe.2026.157980}
}
EUVIMED