Heat Treatment Conditions for High‐Performance High‐Pressure Die‐Cast Al–Si–Cu–Mg Alloy
Advanced Engineering Materials · 2024-01 · 26 (1)
DOI: 10.1002/adem.202301196 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 20.11.2023. Verfasst von Hüseyin Demirtaş und 2 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, Engineering and Physical Sciences Research Council.
Abstract (Originalsprache)
Random porosity in high‐pressure die castings of aluminum alloys poses additional challenges in the form of blistering during follow‐on heat treatment process. To avoid blisters, the current industrial practice is to lower solution temperature, but this compromises the strength. Herein, kinetics of eutectic Si spheroidization and coarsening during various solution treatment conditions and maximizing the dissolution of much needed Al 2 Cu and Al 5 Cu 2 Mg 8 Si 6 phases, followed by formation of their precipitates in the aging stage with higher particle number densities, are studied and then higher tensile strength of 435 MPa in most commonly used high‐pressure die‐cast Al–Si–Cu–Mg alloy without causing blisters is demonstrated.
Förderung
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu
- Engineering and Physical Sciences Research Council
Zitieren
APA
Demirtaş, H., Karakulak, E., & Babu, N. H. (2024). Heat Treatment Conditions for High‐Performance High‐Pressure Die‐Cast Al–Si–Cu–Mg Alloy. Advanced Engineering Materials, 26(1). https://doi.org/10.1002/adem.202301196
Vancouver
Demirtaş H, Karakulak E, Babu NH. Heat Treatment Conditions for High‐Performance High‐Pressure Die‐Cast Al–Si–Cu–Mg Alloy. Advanced Engineering Materials. 2024;26(1). doi:10.1002/adem.202301196
BibTeX
@article{Demirta2024,
author = {Demirtaş, Hüseyin and Karakulak, Erdem and Babu, Nadendla Hari},
title = {Heat Treatment Conditions for High‐Performance High‐Pressure Die‐Cast Al–Si–Cu–Mg Alloy},
journal = {Advanced Engineering Materials},
year = {2024},
volume = {26},
number = {1},
doi = {10.1002/adem.202301196}
}
EUVIMED