EUVIMEDEUVIMED entdecken
Crossref

3D Printing of Multilayered Hydrogel containing Hyaluronic acid and Linalool

Kongsithiseth, Punnatron, Satyajit D. Sarker, Touraj Ehtezazi

Journal of Natural Products Discovery · 18.07.2025

DOI: 10.24377/jnpd.article3240 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Natural Products Discovery, erschienen am 18.07.2025. Verfasst von Kongsithiseth und 3 weiteren Autor:innen.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the 3D printing and the development of multilayered hydrogel formulations containing hyaluronic acid (HA) and linalool (LN) for potential use as a personalised moisturising and anti-acne product. Various shapes were printed via 3D printing for personalised application; however, material characterisation was conducted primarily on the first layer. The average film weight was 2.11 ± 0.20 g, with optimal storage conditions identified as placement on a covered plate at 25 °C. Films containing 10% LN demonstrated a higher linalool release profile (maximum 22.66% of the nominal dose) compared to the 5% LN films, correlating with stronger antibacterial activity against Staphylococcus aureus. FT-IR analysis revealed the absence of C=C and C–H peaks in blank and 5% LN films due to water interference, while 10% LN films displayed characteristic LN peaks. Texture analysis showed that the 5% LN film exhibited greater tensile resistance, with the highest force recorded at 27.500 g. LN played an important role in the transformation of hydrogel ink to a liquid-like state under high strain. In conclusion, these findings highlight the potential of 3D-printed HA–LN hydrogels for customisable skincare applications with dual functionality in moisturising and antimicrobial effects.

Schlagwörter

3D printinghydrogelshyaluronic acidlinaloolanti-acneStaphylococcus aureusantibacterial activitycontrolled releasetensile propertieshydrogel inks

Zitieren

APA

Kongsithiseth, Punnatron, Sarker, S. D., & Ehtezazi, T. (2025). 3D Printing of Multilayered Hydrogel containing Hyaluronic acid and Linalool. Journal of Natural Products Discovery. https://doi.org/10.24377/jnpd.article3240

Vancouver

Kongsithiseth, Punnatron, Sarker SD, Ehtezazi T. 3D Printing of Multilayered Hydrogel containing Hyaluronic acid and Linalool. Journal of Natural Products Discovery. 2025. doi:10.24377/jnpd.article3240

BibTeX
@article{Kongsithiseth2025,
  author = {Kongsithiseth and Punnatron and Sarker, Satyajit D. and Ehtezazi, Touraj},
  title = {3D Printing of Multilayered Hydrogel containing Hyaluronic acid and Linalool},
  journal = {Journal of Natural Products Discovery},
  year = {2025},
  doi = {10.24377/jnpd.article3240}
}
Kostenlos starten →