EUVIMEDEUVIMED entdecken
Crossref

Design, analysis and testing of an external fracture fixation device manufactured from composite materials

Zdeněk Padovec, Pavel Růžička, Radek Sedláček, Milan Růžička

Applied and Computational Mechanics · 2017

DOI: 10.24132/acm.2017.398 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied and Computational Mechanics, 2017. Verfasst von Zdeněk Padovec und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An external fixation device (fixator) placed outside the human body is widely used for treating complicated or infected fractures. It is used for severalweeks, and its main advantages are that the injury can be treated continuously, and the patient can be fully mobile within a few days. In addition, it allows the doctor to reposition bone fragments during the operation and also during convalescence. Composite materials are used in the structure because of their density/stiffness ratio and also because of their X-ray transparency. Main goal of this work is right design of external fixation device from composites which will be proved by experiments with the focus on fixator’s socket. The socket of the fixator is manufactured by press forming from carbon/polyphenylenesulphide (C/PPS) pellets, and the tube for defining the distance between the sockets is manufactured from carbon fiber/epoxy resin (C/epoxy) by filament winding technology. The fixator was designed with the use of finite element calculations, and static and fatigue experiments were successfully performed on two designed configurations.

Zitieren

APA

Padovec, Z., Růžička, P., Sedláček, R., & Růžička, M. (2017). Design, analysis and testing of an external fracture fixation device manufactured from composite materials. Applied and Computational Mechanics. https://doi.org/10.24132/acm.2017.398

Vancouver

Padovec Z, Růžička P, Sedláček R, Růžička M. Design, analysis and testing of an external fracture fixation device manufactured from composite materials. Applied and Computational Mechanics. 2017. doi:10.24132/acm.2017.398

BibTeX
@article{Padovec2017,
  author = {Padovec, Zdeněk and Růžička, Pavel and Sedláček, Radek and Růžička, Milan},
  title = {Design, analysis and testing of an external fracture fixation device manufactured from composite materials},
  journal = {Applied and Computational Mechanics},
  year = {2017},
  doi = {10.24132/acm.2017.398}
}
Kostenlos starten →