EUVIMEDEUVIMED entdecken
Crossref

Design and Analysis of a Synchronous Generator Using Finite Element Method Based ANSYS-Maxwell

Yıldırım ÖZÜPAK

International Journal of Engineering and Applied Sciences · 2022

DOI: 10.24107/ijeas.1163134 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Engineering and Applied Sciences, 2022. Verfasst von Yıldırım ÖZÜPAK. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 12 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The most basic electrical machine that converts mechanical energy into electrical energy is synchronous machines. Synchronous machines can be operated at high speeds and low speeds for different power plants. In terms of system planning, it is important to examine the operating characteristics of the machine at idle and variable load conditions in these cycles. It is very important that generators, which are the basic components of turbines in power plants, have high efficiency when they are designed. While synchronous generators are being designed, many parameters that are compatible with each other must be arranged in an appropriate way. The efficiency of generators can vary greatly by changing very important parameters in the design. In this study, the analysis, design and analysis of the characteristic parameters of a synchronous generator are carried out with the ANSYS-Maxwell-Rmxprt integrated design and simulation program based on Finite Element Method (FEM). In this paper, parameters such as efficiency, induced voltage, phase currents and voltages and output torque of a three-phase synchronous machine were obtained depending on the electrical angle change.

Zitieren

APA

ÖZÜPAK, Y. (2022). Design and Analysis of a Synchronous Generator Using Finite Element Method Based ANSYS-Maxwell. International Journal of Engineering and Applied Sciences. https://doi.org/10.24107/ijeas.1163134

Vancouver

ÖZÜPAK Y. Design and Analysis of a Synchronous Generator Using Finite Element Method Based ANSYS-Maxwell. International Journal of Engineering and Applied Sciences. 2022. doi:10.24107/ijeas.1163134

BibTeX
@article{ZPAK2022,
  author = {ÖZÜPAK, Yıldırım},
  title = {Design and Analysis of a Synchronous Generator Using Finite Element Method Based ANSYS-Maxwell},
  journal = {International Journal of Engineering and Applied Sciences},
  year = {2022},
  doi = {10.24107/ijeas.1163134}
}
Kostenlos starten →