EUVIMEDEUVIMED entdecken
Crossref

Approach towards a scaled testing method for WT components showcased on a material strength test of a plain bearing as main bearing

Jan Euler, Georg Jacobs, Thomas Decker, Noah Smeets, Felix Leuf, Julian Röder

Tribologie und Schmierungstechnik · 16.11.2026 · 73 (3)

DOI: 10.24053/tus-73-0013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tribologie und Schmierungstechnik, online erschienen am 16.11.2026. Verfasst von Jan Euler und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wind turbines play an expanding role in Germany’s energy supply. One aspect of this expansion is the development of larger turbine generations to maximize the harvestable energy from each individual site. With the increase in size, new challenges arise, and turbines experience failures before their designated end of service. WTs require testing and certification on large-scale component and system test benches for the design verification. While turbines increase in scale, large-scale test capacities are not available or highly limited in their availability. Other branches of engineering, such as automotive, railway, or aero-/hydrodynamics, employ scaled testing methods to reduce costs and expedite testing procedures. This study explores the effects of downscaling on testing of a plain bearing main bearing design developed at the CWD – the FlexPad. The FlexPad was built and tested as a main bearing in the 1 MW range and as a downscaled replica of roughly half its original size, providing validated models. The FlexPad’s behaviour is simulated in further scales, determined using the principle of similitude. The aim of the scaling is a similar bearing behaviour as in the real-scale bearing. The simulation results are evaluated regarding the maximum hydrodynamic pressure to ensure the surface material strength is not exceeded. Results show that standard scaling methods based on the state of the art are not suitable, as uniform scaling distorts the pressures achieved in comparison to the original size, due to interactions between the bearings stiffness and the available bearing surface. However, the desired pressures can be achieved through targeted design adjustments that go beyond uniform scaling.

Zitieren

APA

Euler, J., Jacobs, G., Decker, T., Smeets, N., Leuf, F., & Röder, J. (2026). Approach towards a scaled testing method for WT components showcased on a material strength test of a plain bearing as main bearing. Tribologie und Schmierungstechnik, 73(3). https://doi.org/10.24053/tus-73-0013

Vancouver

Euler J, Jacobs G, Decker T, Smeets N, Leuf F, Röder J. Approach towards a scaled testing method for WT components showcased on a material strength test of a plain bearing as main bearing. Tribologie und Schmierungstechnik. 2026;73(3). doi:10.24053/tus-73-0013

BibTeX
@article{Euler2026,
  author = {Euler, Jan and Jacobs, Georg and Decker, Thomas and Smeets, Noah and Leuf, Felix and Röder, Julian},
  title = {Approach towards a scaled testing method for WT components showcased on a material strength test of a plain bearing as main bearing},
  journal = {Tribologie und Schmierungstechnik},
  year = {2026},
  volume = {73},
  number = {3},
  doi = {10.24053/tus-73-0013}
}
Kostenlos starten →