EUVIMEDEUVIMED entdecken
Crossref

Evaluation of the start-up behavior of a novel spherical plain bearing as a main bearing for wind turbines based on scaled tests

Felix Leuf, Georg Jacobs, Jan Euler, Patrick Laubichler, Michael Mirza, Thomas Decker, Julian Röder

Tribologie und Schmierungstechnik · 27.07.2026 · 73 (1)

DOI: 10.24053/tus-73-0003 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tribologie und Schmierungstechnik, online erschienen am 27.07.2026. Verfasst von Felix Leuf und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wind energy is an ever-increasing part of the German and European energy supply. A high reliability and low operational cost are crucial for the economic viability of wind turbines (WTs). One component that often fails before reaching its specified service life is the WTs main bearing. At present, only rolling element bearings are used as main bearings in series production. Segmented plain bearings potentially offer drastic improvements regarding WT downtime in case of failure, as their segments can be exchanged up-tower without the need to dismount the rotor. Plain bearings as WT main bearings are therefore subject to public and industrial research. However, plain bearings experience a high breakaway torque during the WTs start up and high friction during idling operation. The Miba SJB™ is a currently researched plain bearing solution that is characterized by a spherical sliding surface. In this work test rig results for this plain bearing concept are presented. The bearing was tested as a scaled prototype with accordingly downscaled loads on a test rig able to produce forces and bending moments corresponding to loads from a 1 MW WT. Main focus of this work is the analysis of the bearing’s behavior under start-up and idling conditions. After long downtimes, a favorable behavior of the breakaway torque during start-up is determined and a low transition sliding speed is measured during idling operation. The test results demonstrate that WTs with the tested bearing as main bearing can also start up at low wind speeds, as hydrodynamic operation occurs even at low sliding speeds.

Zitieren

APA

Leuf, F., Jacobs, G., Euler, J., Laubichler, P., Mirza, M., Decker, T., & Röder, J. (2026). Evaluation of the start-up behavior of a novel spherical plain bearing as a main bearing for wind turbines based on scaled tests. Tribologie und Schmierungstechnik, 73(1). https://doi.org/10.24053/tus-73-0003

Vancouver

Leuf F, Jacobs G, Euler J, Laubichler P, Mirza M, Decker T, et al. Evaluation of the start-up behavior of a novel spherical plain bearing as a main bearing for wind turbines based on scaled tests. Tribologie und Schmierungstechnik. 2026;73(1). doi:10.24053/tus-73-0003

BibTeX
@article{Leuf2026,
  author = {Leuf, Felix and Jacobs, Georg and Euler, Jan and Laubichler, Patrick and Mirza, Michael and Decker, Thomas and Röder, Julian},
  title = {Evaluation of the start-up behavior of a novel spherical plain bearing as a main bearing for wind turbines based on scaled tests},
  journal = {Tribologie und Schmierungstechnik},
  year = {2026},
  volume = {73},
  number = {1},
  doi = {10.24053/tus-73-0003}
}
Kostenlos starten →