EUVIMEDEUVIMED entdecken
Crossref

Numerical Investigation of Fin Number, Fin Spacing, and Air Velocity Effects on the Thermal Performance of Rotary Regenerative Heat Exchangers

Ezgi Muradoğlu, Hüsamettin Tan, Ali Erişen, Yahya Doğu

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi · 23.03.2026 · 17 (1)

DOI: 10.24012/dumf.1713072 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi, online erschienen am 23.03.2026. Verfasst von Ezgi Muradoğlu und 3 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a detailed numerical investigation into the thermal performance of rotary regenerative heat exchangers, focusing on the influence of fin number, fin-to-inner-diameter spacing, and air inlet velocity. A simplified annular cross-sectional model was utilized to reduce computational cost while preserving geometric accuracy. A total of nine model variations were created by parametrically altering the number of fins (11, 13, and 15) and fin spacing (0.5 mm, 0.75 mm, and 1 mm). Simulations were performed using ANSYS Fluent under transient flow conditions, with air velocities ranging from 2.6 m/s to 3.8 m/s. Results showed that increasing the number of fins and expanding fin spacing both enhance heat transfer by improving flow uniformity and turbulence levels, with effectiveness improvements reaching up to 11%. Conversely, higher air velocities reduce heat exchanger effectiveness due to shortened contact time and boundary layer disruption. The findings highlight that even within a geometrically limited segment, measurable changes in performance occur, offering valuable insights for system-level design optimizations. The study contributes to the literature by demonstrating the feasibility of high-fidelity modeling of small-scale segments to evaluate parameter sensitivity in rotary heat exchangers.

Zitieren

APA

Muradoğlu, E., Tan, H., Erişen, A., & Doğu, Y. (2026). Numerical Investigation of Fin Number, Fin Spacing, and Air Velocity Effects on the Thermal Performance of Rotary Regenerative Heat Exchangers. Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi, 17(1). https://doi.org/10.24012/dumf.1713072

Vancouver

Muradoğlu E, Tan H, Erişen A, Doğu Y. Numerical Investigation of Fin Number, Fin Spacing, and Air Velocity Effects on the Thermal Performance of Rotary Regenerative Heat Exchangers. Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi. 2026;17(1). doi:10.24012/dumf.1713072

BibTeX
@article{Muradolu2026,
  author = {Muradoğlu, Ezgi and Tan, Hüsamettin and Erişen, Ali and Doğu, Yahya},
  title = {Numerical Investigation of Fin Number, Fin Spacing, and Air Velocity Effects on the Thermal Performance of Rotary Regenerative Heat Exchangers},
  journal = {Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi},
  year = {2026},
  volume = {17},
  number = {1},
  doi = {10.24012/dumf.1713072}
}
Kostenlos starten →