EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Flow and Heat Transfer of a Rotary Regenerative Thermal Oxidizer

Xichao Wu iD, Hongyu Yu, Zongxiang Zhu, Xinglei Xiao, Xiaowen Hao iD

ACS Omega · 21.07.2026 · 11 (28) · 42378-42388

DOI: 10.1021/acsomega.6c03099 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 09.07.2026. Verfasst von Xichao Wu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of New Energy, Harbin Institute of Technology, Weihai, Shandong 264200, China. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Harbin Institute of Technology, Key Technology Research and Development Program of Shandong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermal storage combustion technology is one of the most efficient methods for treating volatile organic compounds (VOCs), with the rotary regenerative thermal oxidizer (R-RTO) representing the latest generation. However, research on R-RTOs remains scarce and rarely considers the impact of rotation on the flow dynamics and heat transfer. This study employed simulations using the standard k-ε model with enhanced wall function, porous media model, species transport model, Finite-Rate/Eddy-Dissipation combustion model, and the Sliding Mesh method. After validating the simulation accuracy, the velocity and temperature distributions and heat transfer patterns within the channels of the regenerator were investigated. The following conclusions were drawn: The gas flow was uniform within the regenerative chamber but became nonuniform in the lower section of the chamber and within the oxidation chamber owing to the structural and flow directions. This nonuniformity also affected the uniformity of the temperature distribution. A small portion of the gas within the combustion chamber exhibited a short residence time. During rotary valve rotation, inlet gas flow short-circuiting occurred, causing severe fluctuations in the inlet/outlet pressure difference and flow rate, and reducing the VOC removal efficiency. An analysis of the thermal storage media channels revealed that the channel length and inlet air velocity significantly affected the heat transfer coefficient. However, the impacts of these two parameters (length and velocity) and the switching time on thermal efficiency were minor. Furthermore, the switching time had little impact on the heat transfer coefficient.

Autor:innen und Institutionen

  • School of New Energy, Harbin Institute of Technology, Weihai, Shandong 264200, China.
  • School of Energy Science and Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150001, China.

ORCID-Profile: Xichao Wu, Xiaowen Hao

Förderung

  • Harbin Institute of Technology
  • Key Technology Research and Development Program of Shandong Province

Zitieren

APA

Wu, X., Yu, H., Zhu, Z., Xiao, X., & Hao, X. (2026). Flow and Heat Transfer of a Rotary Regenerative Thermal Oxidizer. ACS Omega, 11(28), 42378-42388. https://doi.org/10.1021/acsomega.6c03099

Vancouver

Wu X, Yu H, Zhu Z, Xiao X, Hao X. Flow and Heat Transfer of a Rotary Regenerative Thermal Oxidizer. ACS Omega. 2026;11(28):42378-42388. doi:10.1021/acsomega.6c03099

BibTeX
@article{Wu2026,
  author = {Wu, Xichao and Yu, Hongyu and Zhu, Zongxiang and Xiao, Xinglei and Hao, Xiaowen},
  title = {Flow and Heat Transfer of a Rotary Regenerative Thermal Oxidizer},
  journal = {ACS Omega},
  year = {2026},
  volume = {11},
  number = {28},
  pages = {42378--42388},
  doi = {10.1021/acsomega.6c03099}
}
Kostenlos starten →