Enhancing Dimensional Stability of Sengon Wood through Synergistic Citric Acid-Glycerol Cross-Linking and SiO2/TiO2 Nanocomposite Impregnation
Jurnal Sylva Lestari · 12.05.2026 · 14 (2) · 317-339
DOI: 10.23960/jsl.v14i2.1372 ↗Kurz gefasst
Fachartikel in der Zeitschrift Jurnal Sylva Lestari, online erschienen am 12.05.2026. Verfasst von Sartika und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Sengon wood (Falcataria moluccana) is a fast-growing, low-quality species. In this research, nanoparticle-based impregnation was used to improve the quality and characteristics of sengon wood. SiO2 nanoparticles derived from bamboo leaves were synthesized using the sol-gel method, while TiO2 nanoparticles and SiO2/TiO2 nanocomposites were synthesized using the hydrothermal method. A mixture of citric acid, glycerol, and nanoparticles (SiO2, TiO2, and SiO2/TiO2 composite) was formulated as an impregnation solution at 1% concentration. Sengon wood impregnation was conducted using a vacuum-pressure method. The physical properties tested included weight percent gain (WPG), bulking effect (BE), anti-swelling efficiency (ASE), water uptake (WU), and density. The size of the synthesized nanoparticles was analyzed using a particle size analyzer (PSA). The impregnated sengon wood was characterized using Fourier transform infrared spectroscopy (FTIR) to identify functional groups and X-ray diffraction (XRD) to determine the degree of crystallinity. PSA analysis showed that the material used in the impregnation process is nanoscale (< 100 nm) and exhibits the best dispersion stability in the SiO2/TiO2 nanocomposite. Nanoparticle-impregnated sengon wood exhibited reduced WU and improved dimensional stability compared to untreated samples, especially in citric acid-glycerol and composite nanoparticle treatments. FTIR analysis identified the formation of ester bonds and the reduction of hydroxyl groups, and XRD analysis showed a decrease in crystallinity upon impregnation with nanoparticles and a citric acid-glycerol mixture. Overall, the use of citric acid-glycerol with the nanocomposite showed effectiveness in improving the dimensional stability and physical properties of sengon wood. Keywords: citric acid-glycerol, dimensional stability, sengon, SiO2/TiO2 nanocomposite, wood modification
Zitieren
APA
Sartika, Rahayu, I. S., Darmawan, W., Yunianti, A. D., Prihatini, E., Laksono, G. D., & Ismail, R. (2026). Enhancing Dimensional Stability of Sengon Wood through Synergistic Citric Acid-Glycerol Cross-Linking and SiO2/TiO2 Nanocomposite Impregnation. Jurnal Sylva Lestari, 14(2), 317-339. https://doi.org/10.23960/jsl.v14i2.1372
Vancouver
Sartika, Rahayu IS, Darmawan W, Yunianti AD, Prihatini E, Laksono GD, et al. Enhancing Dimensional Stability of Sengon Wood through Synergistic Citric Acid-Glycerol Cross-Linking and SiO2/TiO2 Nanocomposite Impregnation. Jurnal Sylva Lestari. 2026;14(2):317-339. doi:10.23960/jsl.v14i2.1372
BibTeX
@article{Sartika2026,
author = {Sartika and Rahayu, Istie Sekartining and Darmawan, Wayan and Yunianti, Andi Detti and Prihatini, Esti and Laksono, Gilang Dwi and Ismail, Rohmat},
title = {Enhancing Dimensional Stability of Sengon Wood through Synergistic Citric Acid-Glycerol Cross-Linking and SiO2/TiO2 Nanocomposite Impregnation},
journal = {Jurnal Sylva Lestari},
year = {2026},
volume = {14},
number = {2},
pages = {317--339},
doi = {10.23960/jsl.v14i2.1372}
}
EUVIMED